- First Name
- Bronco Lilly
- Joined
- Apr 14, 2023
- Threads
- 3
- Messages
- 499
- Reaction score
- 640
- Location
- Newfoundland,Canada
- Vehicle(s)
- BSBL
Ordered a set as well, this forum is costing me the price of a Baby Bronco’s “baby.”
I see accessories I want / need and well I fold like a cheap dollar bill! Then hit the order button.
Thanks for all the valuable information.
I see accessories I want / need and well I fold like a cheap dollar bill! Then hit the order button.
Thanks for all the valuable information.
- First Name
- Michael
- Joined
- Sep 18, 2022
- Threads
- 60
- Messages
- 807
- Reaction score
- 987
- Location
- Syracuse, New York 13219
- Vehicle(s)
- '23 OBX, '20 Ecosport, '23 Kymco People S 150i ABS
Good find Wireman! Thank you for this tip and the purchase info. Just ordered for my '23 OBX.
Last edited:
I just washed my BS. When I was wiping down the rear window it looked like the wiring clip wasn’t pushed in all the way.
Sure enough, I was able to push it forward. It the tension on the wire pulled it out just a bit.
My covers should be in tomorrow.
Sure enough, I was able to push it forward. It the tension on the wire pulled it out just a bit.
My covers should be in tomorrow.
- First Name
- Kevin
- Joined
- Mar 16, 2023
- Threads
- 55
- Messages
- 2,494
- Reaction score
- 3,706
- Location
- Gainesville
- Vehicle(s)
- 2023 Ford Bronco Sport Outer Banks Area51
Post #14, third picture shows adhesion promoter.
Does not surprise me that Ford left off a cover like this, when they leave off under dash covers, engine covers, and hood insulation covers.
But I still like the little guy.
OP
OP
- Thread starter
- #24
I never had an issue with the connection. My concern was how easy the prong on the heating element, where the coiled wire connects, would bend. Bend it to many times and it will surely break off the heating element.
It's very soft metal and I bent it somehow not realizing it. That's how I ended up with the coil catching between the glass and gasket, thus a serious water leak.
Like I stated earlier, these should cost about 10 cents to make. Crazy price for what they are but it will help to keep from doing the same thing again.
Having that connector exposed isn't the best design by Ford. That window opening is fairly small and it's easy to hit them or catch the wire when putting stuff in the back IMO.
- First Name
- Eric
- Joined
- Mar 19, 2022
- Threads
- 10
- Messages
- 2,166
- Reaction score
- 3,150
- Location
- Belleville, IL
- Vehicle(s)
- '08 BMW R1200 GS Adv, '23 Norden Expedition
Installed mine from Amazon yesterday. Definitely good peace of mind but $15 for a couple of $.10 parts is hard to stomach. They do have to cover the cost of a mold and the labor to put all those little pieces of double sided tape on them. I'm sure this is not a high volume product for them. Just imagine how much Ford would charge for these!
OP
OP
- Thread starter
- #26
We all know where these are made. Yea the middle man makes the profit here for sure. I guess these will fit the full size Bronco also so the connections must be similar.
Ford, probably at least $20.
- First Name
- Peter
- Joined
- Nov 1, 2022
- Threads
- 3
- Messages
- 228
- Reaction score
- 244
- Location
- Buffalo NY
- Vehicle(s)
- Ford Bronco Sport
Just checked Amazon and sadly , as of now, they are sold out. Not sure if they'll get more.
OP
OP
- Thread starter
- #28
This one is for the Ford Bronco, see if you think it’ll fit the Bronco Sport. It does not say free returns however.
HTHE for Ford Bronco Tailgate Rear Window Heater Cable Cover Antidust Waterproof Cover Compatible with Ford Bronco 2021+ 2/4Doors（2pcs,ABS,Model A） https://a.co/d/2paQUzI
- First Name
- Patrick
- Joined
- Nov 16, 2022
- Threads
- 1
- Messages
- 593
- Reaction score
- 955
- Location
- Parker, TX
- Vehicle(s)
- 2022 Cyber Orange BS BB, 1997 Ford F250 HD 7.3 PSD
Just put mine on today. I can't believe they just left those exposed like they did. Cheers!
Sponsored