- Thread starter
- #1
I'm wondering if/how everyone is using the spare tire foam insert tray and it seemingly randomly shaped impressions. I'm not sure if engineers had an actual item in mind for each shape or just added the shapes randomly. Either way it gives each owner the chance to personalize with the different shapes.
Most of the tools carried are just randomly placed. The one exception was by cutting out a small piece of foam I could fit a 30 inch breaker bar and higher quality lug nut socket in the long slot on the left side.
There is room below the spare tire for a complete 3/8" socket set, work gloves and an assortment of bungies and tie down straps.
I was hoping my Viair 88P Air compressor would fit below the tire but it didn't so it just sits behind the rear seat.
I'm curious to see if/how others are using this space.
Most of the tools carried are just randomly placed. The one exception was by cutting out a small piece of foam I could fit a 30 inch breaker bar and higher quality lug nut socket in the long slot on the left side.
There is room below the spare tire for a complete 3/8" socket set, work gloves and an assortment of bungies and tie down straps.
I was hoping my Viair 88P Air compressor would fit below the tire but it didn't so it just sits behind the rear seat.
I'm curious to see if/how others are using this space.
Sponsored