I didn't get a chance to tinker with it last night, but I will circle back here when I do.
Sponsored
The 2025 model has mirrors with memory. I think it could be done in the new model! What Fodscan configuration needs to be changed?
Not sure. Look below:
https://www.broncosportforum.com/forum/threads/mirrors-tilt-down-reverse.18106/post-283507
https://www.broncosportforum.com/forum/threads/mirrors-tilt-down-reverse.18106/post-283533
https://www.broncosportforum.com/forum/threads/mirrors-tilt-down-reverse.18106/post-283557
Even then, it may only work one side at a time:
https://www.broncosportforum.com/forum/threads/mirrors-tilt-down-reverse.18106/post-283602
Hopefully this helps you figure it out.
I did all that, but the option doesn't appear on the screen. It obviously doesn't work with the Bronco Sport. Thanks!
Really? That's strange. I had the option appear, but it was not able to be turned on.
- First Name
- Steve
- Joined
- Aug 25, 2024
- Threads
- 9
- Messages
- 366
- Reaction score
- 466
- Location
- BC, Canada
- Vehicle(s)
- 2023 Bronco sport
what do you mean by mirrors with memory? My 2023 has power mirror memory that you can tie to your key fob and the three selector buttons.
I imagin you could set the mirrors up for how you want them for reversing (usaly its just the curb side one so you can see the rear tire) and tie that to position 3. the only issue is you have to shift to park briefly to hit the memory button to re-adjust their position. in my truck I can adjust the seat/mirrors while I am driving via the memory buttons, so I wonder if there is a way to allow that in the bronco sports.
Last edited:
Yes. I don't see anything! Can you show me how it appears for you?
Yes, their mirrors also have memory.
I don't know why it's not working.
I can't anymore. I swapped out the APIM in ours and I am running Sync 4 now. But when it had the Sync 3 module, the option for reverse tilt mirrors did appear. However, it was grayed out and I was not able to toggle it on/off.
After adding the same thing to the IPC, it works!
Now I just need to activate the automatic folding. (difficult but not impossible).
Nice! Make a write up of what you did. I will probably follow your lead on this. I don't care about this feature on my F150; don't really need it since my truck has literally 8 cameras .
However, I would love to add this to our BS.
Did they try activating it in the APIM and the IPC?. It only worked when I did that.
I second this!Nice! Make a write up of what you did. I will probably follow your lead on this. I don't care about this feature on my F150; don't really need it since my truck has literally 8 cameras .
Sponsored