Climate Domain works! (On screen climate controls)

Jess1

Badlands
Well-Known Member
Joined
Feb 10, 2022
Threads
2
Messages
243
Reaction score
274
Location
SE Texas
Vehicle(s)
F150
Took a bit of fiddling. Used the plain language version in Forscan on APIM module. It wouldn't take before, so "restarted " with engine on. Added Climate Domain first, then added each control in order.
Heated seats and steering wheel now on main screen, all other Climate controls available on screen.
Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135737


Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135746


Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135801
Sponsored

 

Fordson04

Big Bend
Well-Known Member
First Name
Jonathan
Joined
Nov 19, 2021
Threads
1
Messages
74
Reaction score
77
Location
VA
Vehicle(s)
2021 Bronco Sport
I could never get this to work for me either I'll have to give it another shot this afternoon once my wife gets home since her car's in the shop and I work from home so she stole my car haha
 
OP
OP

Jess1

Badlands
Well-Known Member
Joined
Feb 10, 2022
Threads
2
Messages
243
Reaction score
274
Location
SE Texas
Vehicle(s)
F150
It was a bit fussy - just powering up didn't work - had to do it with the engine running for each step... good luck!
 

Mlarv

Outer Banks
Well-Known Member
First Name
Mike
Joined
Feb 2, 2022
Threads
9
Messages
73
Reaction score
54
Location
TN
Vehicle(s)
2022
Which spread sheet are you using? I might give this a try also
 

Moltenburn

Badlands
Well-Known Member
Joined
Jan 18, 2022
Threads
7
Messages
217
Reaction score
413
Location
Denver
Vehicle(s)
2022 BS BL w prem, 360, shelf. VW Arteon
Damn buddy. You the man for figuring this out. I have forescan tool and plan on digging into the system as well.
 


OP
OP

Jess1

Badlands
Well-Known Member
Joined
Feb 10, 2022
Threads
2
Messages
243
Reaction score
274
Location
SE Texas
Vehicle(s)
F150
One more thing - at first on/ off cycle after adding climate, the center screen animation is a fade on/off Ford logo. The Bronco animation comes back after the 2nd restart...
 

alanovalles

Outer Banks
Member
First Name
Alan
Joined
Jun 29, 2022
Threads
0
Messages
10
Reaction score
0
Location
Mexico
Vehicle(s)
Bronco Sport
Took a bit of fiddling. Used the plain language version in Forscan on APIM module. It wouldn't take before, so "restarted " with engine on. Added Climate Domain first, then added each control in order.
Heated seats and steering wheel now on main screen, all other Climate controls available on screen.
Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135737


Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135746


Ford Bronco Sport Climate Domain works! (On screen climate controls) 20220411_135801
How did you add the climate domain? Is is simple to do for a regular person?
 

bjbena

Well-Known Member
First Name
Barry
Joined
Oct 28, 2021
Threads
39
Messages
1,019
Reaction score
811
Location
31047
Vehicle(s)
Escape SEL. EcoSport SES
Just tried this today and it works. Spot on man!
 


Dude

Badlands
Well-Known Member
Joined
Sep 20, 2022
Threads
19
Messages
1,432
Reaction score
1,380
Location
Arizona
Vehicle(s)
2022 Bronco Sport
Do you have forscan?
Yes I have FORSCAN and I have the adapter and forscan is installed on a laptop and works in my bronco sport. I have already done a complete backup of my module data and saved that.
 

Rodrigo_V_U

Well-Known Member
First Name
Rodrigo
Joined
Aug 11, 2022
Threads
12
Messages
99
Reaction score
127
Location
Curitiba - Brazil
Vehicle(s)
Ford Bronco Sport Wildtrak
any of you found a way to keep "recirculation mode" ON until buton pressed OFF? I always used it closed in my cars and in the BS it opens again after few minutes
 

bjbena

Well-Known Member
First Name
Barry
Joined
Oct 28, 2021
Threads
39
Messages
1,019
Reaction score
811
Location
31047
Vehicle(s)
Escape SEL. EcoSport SES
Glad it worked for you but can you please post detailed instructions for others to follow?
OP already said he did it via Forscan on the APIM module. "Used the plain language version in Forscan on APIM module. It wouldn't take before, so "restarted " with engine on. Added Climate Domain first, then added each control in order. "

Not much else to add.
 
 




Top