I haven't seen a damn thing yet...
Rally Inovations came out with a skid plate. Not perfect but it's a start.
That thread is the only place i can see it though, i havent been able to find where you actually get one, even on their site under skid guards i just see them for Imprezas.
It's new. I'm sure if you contacted them they could tell you more.
If its going to be the same 11 gauge aluminium as what they have for the subarus on the site im not how helpful that will really be. I'm considering just fixing something like 1/4" aluminum plates and trying to get them bolted up myself. I wasnt aware the transmission computer was in such a dangerous spot (right up front under the fog light) so seems like that could get damaged quite easily. Probably won't attempt too much off roading with this like i had been hoping
From what I read in the original thread linked above, it's 1/8" thick, which is closer to 8 gauge. That's thicker than the 11 gauge Subaru skids, so at least it's a little better.
I was considering using the splash guard as a template for some plate steel but I would really like something that came up over the bumper valance... or replaced it all together. "Kind of" like what they showed in the picture.
This is good to know theres a spot for them, i would like some rock sliders although they would eat into the already limited clearance. What i really need are tow points in the front and back. I didn't get the tow package so i need to get a hitch installed (although mine does have the threaded insert for a hook in the rear). I need to get some tow point up front as well but from what i've seen you cant just get the 2 factory front hooks and add them to the big bend as it doesnt have the same mount points as the other trims.
From what I'm envisioning the rock sliders could be kept pretty low profile. Figuring out the tow hook problem is definitely something that needs to be addressed. I haven't looked into the mounting points that these models apparently don't have but there has to be a solution.
