What did you do TO your Bronco Sport today?

[Horse n Buggy]

Did you have to do any cutting to the bumper or did you get one already fabricated for hitch?

I chose to cut the stock bumper. On the inside of the bumper there is a seam in the plastic that functions as a cut guide for the hitch install

Sponsored

 

[Spartan007]

I chose to cut the stock bumper. On the inside of the bumper there is a seam in the plastic that functions as a cut guide for the hitch install

Good to know, thank you!
I am regretting not adding it from factory on mine so have been mulling over whether or not I want to add it aftermarket

 

[Deleted member 6350]

She’s gone in for a Full Detail with Ceramic Coat, plus treatment on the Leather Seats.
Can’t wait for the New Pics.

 

[davidg4781]

I dug out my old utility box I used to keep supplies in the back of my car. This is just some stuff to add but I’ll get it sorted out later. And I cleaned up the Off Road Assistance Kit and secured it.

Inside the Action Packer I have an umbrella, air compressor, old first aid kit, car utility kit, gloves, and some window cleaner.

 

[Bill G]

You really need to relabel that glass cleaner -- this could get you thrown out someplaces !!

 

[Mrmike]

Installed the rubber pen/pencil holder under the cover of my center

console. Yet another part Ford eliminated from the newer Bronco Sports

 

[Deleted member 6350]

Installed the rubber pen/pencil holder under the cover of my center

console. Yet another part Ford eliminated from the newer Bronco Sports

Do you happen to have a part number for that ???

 

[Deleted member 6350]

Ok Ceramic Coating is Done. I think the Atlas Blue Metallic is Stunning !

 

[Mrmike]

Do you happen to have a part number for that ???

#YS4Z-19A377-CA Ordered from Ford Parts Center

 

[Deleted member 6350]

#YS4Z-19A377-CA Ordered from Ford Parts Center

Thank You Very Much.

 

[CrazyKZ]

I kept looking at that wondering how that part is supposed to stick there with that protrusion. I just went out to my Bronco and saw the hole! I had no idea. haha Why would Ford make the hole and not put in a 30 cent part to fill it? Or is it there for something else too?

 

[GR3EN]

I got the side marker lights for my upcoming birthday so I got those installed and running.

 

[Bloomsey]

Have you ever tried this? Just spray it on your wet car and wipe it dry. I use two cloths: one to get the big drops off, the other to polish.

I am going to purchase this because I am having the same issues with water marks on my 23 OBX. Can you say how long you have to let it sit before wiping down or any other tips you have? Thanks Mark

 

[Mark S.]

I am going to purchase this because I am having the same issues with water marks on my 23 OBX. Can you say how long you have to let it sit before wiping down or any other tips you have? Thanks Mark

You can wipe it off as soon as you spray it on. If it's a cool day and you're in the shade you can spray the entire car then dry it as you normally would. Your drying towel will always be a bit damp no matter how well you wring it out, so I usually go back over the car with a completely dry microfiber towel for the final polish.

 

[JohnSilver]

Took off OEM roof bars and put on the rhino rack bars. Wanted more of a low profile, the OEMs I think were like 8in off the roof. Plus a bit of overhang for future mounts (awning). I like the looks much more as well ?

OEM bars will be for sale if anyone is interested. Will sell for cheap.