When I actually have a BS I might take you up on that.Eric, If you scan it and send me the stl file, I'll print it out of dark gray ABS for you to test.
Sponsored
When I actually have a BS I might take you up on that.Eric, If you scan it and send me the stl file, I'll print it out of dark gray ABS for you to test.
Its for the full size Bronco but this would be great!I see an opportunity for someone to 3D print inserts that hold the phone in the right location on the charging pad. It would only need to be about 1/2 the thickness of the phone. Of course there are a lot of variables for phone model and then the cases that everyone throws on. I'm still about 6 weeks from having a BS but I do have a 3D scanner that would give a decent model of the charging area. I don't have a 3D printer but I could use one at work if I buy my own material of course.
I realize I'm replying to a very old post, I'm going to get a bit semantic on a couple of points above. MagSafe devices will charge with Qi chargers, and vice versa, but it isn't 100% 1:1.The only difference between Qi and MagSafe is the magnet and metal ring for the magnet. MagSafe is Qi with an extra feature. Trying to say that MagSafe is not Qi compatible is insanity. You can put a MagSafe phone on a Qi charger and it will charge. You can lay a Qi phone on a MagSafe charger and it will charge.
Ok so, today I went and had some work done under warranty for my BS. They have a update out now for your wireless charging pad. It fixes the issue that a lot of us were having with the pad disconnecting from our newer phones for no good reason. I have an iPhone 13 Pro Max with a standard leather apple case and had the same issue. When I went in I asked about it and they updated the pad in the system along with the other work under warranty. I recommend doing this ASAP as it immediately fixed my issue. Make sure you cases are compatible as well and you don’t have anything attached to the backHas anyone had issues with the wireless charger in their BS? The wireless charging works, but the notification saying "wireless charging activated" pops up every minute or so while charging. I have an iPhone 12 and read somewhere that it could be interference caused by the magsafe/magsafe case but not sure.
OK this is pretty big news.Ok so, today I went and had some work done under warranty for my BS. They have a update out now for your wireless charging pad. It fixes the issue that a lot of us were having with the pad disconnecting from our newer phones for no good reason. I have an iPhone 13 Pro Max with a standard leather apple case and had the same issue. When I went in I asked about it and they updated the pad in the system along with the other work under warranty. I recommend doing this ASAP as it immediately fixed my issue. Make sure you cases are compatible as well and you don’t have anything attached to the back
Any more info on your work order from the dealership? Like what software or which module needed to be updated?Nope, the part is fine. It is a software issue that is causing a malfunction between the MagSafe on a new iPhone and the charger. For some reason the old software just doesn’t agree with it.