Has anyone installed Tufskinz on the cargo door lettering?

[rocks]

The product looks very nice.

Sponsored

 

[xtinction]

I just bought overlay lettering from Etsy for less than $20. I should be getting it tomorrow and putting it on this weekend. I will take pics. I have a black BS big bend in all black with the black diamond package. I am going for a blackout look and want to hide the white.

Will also black out the emblem on back and anything else that I can as well.

 

[Bucko]

I like the stock lettering color on the Area 51 color we have.

 

[bdg88888]

The product looks very nice.

Yes. See the pic. I much prefer the black letters as my BS Badlands has no white on it. I did the front grill, too.

 

[Sojourner]

I have the Tufskinz letter overlays on the front of my Bronco. Far better than the from-Etsy thin (and cheap) overlays I originally had.

The Turskinz are expensive, but "worth every penny" (actually, Tufskinz products are about 20% over-priced to my mind, but I'm betting you get the my drift).

 

[xtinction]

I am sure that they are better. But it costs $110 for the front and back. Etsy was $17 for me. If I double up for thickness, it woudl still be less than half of the tufskinzs. Also, if they dont look good, I can always peel them off and get the tufskinzs. I will post some picks after i put them on this weekend.

 

[CancunBadlands]

I got a 3D ABS printed black letters, these one's go over the OEM white letters, perfect fit, attached with a 3M double side tape.
I ordered them back in early 2024 from Aliexpress China, I can't find the seller. Sorry

 

[Bucko]

China? How long did it take to receive them? Plus, with the potential tariffs, this could be more and a longer wait.

 

[xtinction]

I found some on eBay. Like $50 for the set.

 

[rocks]

I found some on eBay. Like $50 for the set.

Ford has them on the accessory site for $59 less 15%. If I decide to buy them, I'll use the new buy Ford points which I haven't received yet.

 

[Sojourner]

I got a 3D ABS printed black letters, these one's go over the OEM white letters, perfect fit, attached with a 3M double side tape.
I ordered them back in early 2024 from Aliexpress China, I can't find the seller. Sorry

Yup. This is what I have on the Bronco Sport, as well. Orange overlays on Eruption Green.

Then I tried the Tufskinz on my Bronco. I like both approaches.

 

[Sojourner]

China? How long did it take to receive them? Plus, with the potential tariffs, this could be more and a longer wait.

Like @xtinction I bought my set of overlays (orange; for both front and back of the BS) from a US-based seller on eBay. Bought two sets just in case (as they seemed to go in an out of availability).

 

[rocks]

Yup. This is what I have on the Bronco Sport, as well. Orange overlays on Eruption Green.

Then I tried the Tufskinz on my Bronco. I like both approaches.

Did you use some Dawn and water to line the letters up easier?

 

[Sojourner]

Did you use some Dawn and water to line the letters up easier?

Nope. In both cases (Tufskinz and overlays) I thoroughly cleaned with rubbing alcohol the white Bronco and Bronco Sport lettering, let it dry, and then lightly put them in place.

Fully on with the plastic letter overlays (but lightly just in case they needed readjusting (they didn't, they fit pretty much perfectly)).

Wrt the Tufskinz, I peeled away just a bit of the top of the Tufskinz's backing to place the letter (again, lightly in case it needed readjusting. One letter did) and when satisfied I pulled off all the backing and pressed into place.

Turned out to be less nerve-wracking than I thought it would be.

 

[JimC]

Tufskinz are a real good product
Ive got them on my Ranger & my wifes BS
Dont have pice of the BS BUT these are on my 2019 Ranger so you can see they do last