If you've reset back to factory values, reset your fault codes by clicking the yellow triangle with the power button symbol (circle intersected by a vertical line at the 12 o'clock position). Report back whether the codes returned.
I greatly appreciate the reply. I did the relearn for both modules as per the tutorial. I may end up at the dealer. I didn’t see any difference but 1 value change between the dl ab vs what I saved. I went and changed the dl ab file from ford and did the change manually and it had no affect.
I did however get the cabin exit honk disabled. And parking lights with drl’s. At least that worked for me.I greatly appreciate the reply. I did the relearn for both modules as per the tutorial. I may end up at the dealer. I didn’t see any difference but 1 value change between the dl ab vs what I saved. I went and changed the dl ab file from ford and did the change manually and it had no affect.
nope… fml
It’s acting like I replaced the entire PCM. That shows the VIN mismatched.
Seems like the PCM doesn't want to communicate correctly with the rest of the vehicle. How many times did you try the PCM relearn? Maybe something misbehaved during your last relearn and it's freaking out?
twice
DL from Ford.
Hmm. I'd recommend comparing your current as built to what was downloaded from Motorcraft to see if it carried over correctly. I had problems with the Motorcraft as built a little while back. And double check the VIN used to download from Motorcraft was the correct VIN.
Restored successfully! Thanks for helping. I had 3 values to change. All good. Now to shut that damn cabin honk off... I WILL NOT BE DOING THIS AGAIN LOL
