- Joined
- Jan 23, 2021
- Threads
- 13
- Messages
- 396
- Reaction score
- 427
- Location
- West Virginia
- Vehicle(s)
- 2021 Bronco Sport Badlands, 2021 RAV4 TRD Offroad
- Thread starter
- #1
I did some self-inflicted damage over the weekend, going over a rock on the driver side. Luckily that was while backing out, ie at low speed. Tore up that flimsy underbody cover (not sure what it's called) at about front driver door half point. I had to cut out a small piece of it entirely as wind kept pushing it down towards the ground on the highway. Looks like I also scraped the frame underneath of that cover. Pictures are attached.
I'm hoping somebody could help me identify the part needing replacement. Looks like it'd need to be the entire underbody (felt like) panel. Once the exact part's identified, I assume it's relatively easy to replace it, unless I'm totally off here. I'm just trying to figure out if I could do the replacement myself or take it to the dealer instead.
As far as scrape goes, what would you recommend using to touch it up with?
I'd appreciate any help or feedback. Thanks.
I'm hoping somebody could help me identify the part needing replacement. Looks like it'd need to be the entire underbody (felt like) panel. Once the exact part's identified, I assume it's relatively easy to replace it, unless I'm totally off here. I'm just trying to figure out if I could do the replacement myself or take it to the dealer instead.
As far as scrape goes, what would you recommend using to touch it up with?
I'd appreciate any help or feedback. Thanks.
Sponsored