- First Name
- Jason
- Joined
- Sep 2, 2021
- Threads
- 3
- Messages
- 260
- Reaction score
- 277
- Location
- California, US
- Vehicle(s)
- 2021 Bronco Sport
Ford Bronco Sport uses the 8F35 (8 speed, FWD orientation, 350 Nm design-torque). The 10R80 is 10-speed, RWD orientation, 800 Nm design-torque.This is a video of the disassembly of a 10 speed 10R80 Transmission, not sure if it is what is used in the BS , but most likely a Mustang , but it gives you an idea of how complex these tranny's have become in some ways . I didn't get any sound , but they label stuff .
At 48 min. he disassembles the Valve Body . The black gasket looking thing may be the Separator Plate .
I posted some background info on the 8F35 over here:
https://www.broncosportforum.com/forum/threads/the-oddity-of-close-2-3-gear-spacing-and-the-ford-8f35-8-speed-automatic-in-bs.3949/
(350 Nm ~= 258 lb-ft of torque)
Sponsored