DZG LED Side Marker Lights

[maconmatt]

Does anyone know anything about these? They wire into the turn signals.

https://www.amazon.com/dp/B09LCPMNJ1/?coliid=I2U24FZJT2VMWZ&colid=MXCI723ATRKB&psc=1&ref_=lv_ov_lig_dp_it

I think they look great. I'm curious as to the quality.

Sponsored

 

[BoxerBronco]

Just reviving this thread…looks like these are available on Amazon.

Anyone?

 

[Warpious]

Just reviving this thread…looks like these are available on Amazon.

Anyone?

My wife is also curious about them but have not tried them

 

[Pmk1710]

I got them installed on mine. Look great, work great, easy install. I did splice them directly into the signal light wiring from the headlights. Ive had no light dimming issues or electrical issues post install.

The wires are a very thin gauge, and I recommend taking some hot glue to the back of the inserts just to secure them a bit more, and create some additional seal form the elements. but, the wires were long enough to get to each headlight assembly for splicing.

 

[BoxerBronco]

@Pmk1710 thanks for this info…great to know that they don’t cause any issues…good tip on the wiring. I would be soldering, shrink wrapping and shrink wrapping again!

 

[Pmk1710]

Here is the original post with some step by step install and info on what wires to splice. I followed it all step by step and all works like a charm

https://www.broncosportforum.com/forum/threads/project-obronco.2688/post-84674

 

[Dustymedic]

Just got mine from Amazon today. Waiting for the heat to break to install them..

 

[Deleted member 6350]

 

[Kraken1]

I want to hook mine up to the side marker light but I can't figure out how to pop out the side marker light. Can anyone help me with this, please?

 

[jimharrison1950]

I got them installed on mine. Look great, work great, easy install. I did splice them directly into the signal light wiring from the headlights. Ive had no light dimming issues or electrical issues post install.

The wires are a very thin gauge, and I recommend taking some hot glue to the back of the inserts just to secure them a bit more, and create some additional seal form the elements. but, the wires were long enough to get to each headlight assembly for splicing.

Anyway, you could send pic of where you tied into the turn signals. Thanks

 

[PonyDriver43]

I want to hook mine up to the side marker light but I can't figure out how to pop out the side marker light. Can anyone help me with this, please?

You can turn front wheels and remove 3-4 of those plastic push pins and pull inner fender liner out of the way and reach it that way. It is very tight but can be done. That is where I powered my "raptor" lights.

 

[Kraken1]

Thank you for responding. Yes, I got that far but I wanted to pop out the marker light and finally had to give up.

 

[MyKindOfBS]

I was thinking about these. The reviews for the TECTICO are not that great. Any better luck from these?

Sponsored