its possible but going to be silly expensive if you go with the Ford parts that are on the Sasquatch. The bar alone is back ordered most places and hereās one I found in stock $2500+
Do your tow hooks have a hole at the top that is about 7/8ā diameter? The nudge bar I removed had bushings, or inserts if you want to call them that, about 7/8ā diameter, that went through the holes on the recovery point block.
. #3 in the diagram is the tow hook style the bar mounts too. The ones that come on the badlands are #4
From this pic, I donāt see how it would work. I just donāt see the bolt holes to mount the recovery block. Refer to Pixlpushās diagram.My tow hook
I have a nudge bar I would let go for a few hundred, but itās the other hardware that would send the project to the moon.
Ford didn't offer a specific OEM nudge bar directly from the factory, but there are some third party options like rough country:
Thus the reason this post was created.
yup! Thatās why everyone was referring to the 2025 bar.Thus the reason this post was created.
There are some that require you remove the tow hooks, and there are a couple that mount without removing them. Depends on what look you want.
