Search results

The ford ranger lift is actually quite solid on my badlands., it uses The factory badlands (the lower trims don’t have the subframe attachments, so yes it is ONLY cosmetic on non BL trims) attachment has plenty of strength. It uses the recovery point as a Bolt mounting point and the actual steel...

The ford ranger lifts bar could be used to mount a solid plate to it, but forward camera would be useless, as would crash braking. Remove-able rear mounted is a viable option, particularly since the vehicle only weighs 3700 lbs a 5000 lb winch is plenty.(1.3x vehicle weight).

Wheel well pinch weld fabrication. Someone below showed how they did it . 31 inch tires Are 2 inches larger Than factory Spec. Lifting DOES NOT help tire clearance, it helps body Be higher, but IN NO WAY helps The tires be farther from the body insides When you rotate the steering wheel. If you...

Your right. “Non body on frame”

The felt fender liner is being brushed by the inside treads at full lock And about 1/16th turn before.ill gwt a photo later today . The liner has no dirt on It There is how I know.

So I hang out with the local jeep camping club locally and some trips require 30+ inch tires to participate. So I went with 235/75r17s on my 22 badlands (lifted 1.5 , though lifting won’t effect max tire size). There is very slight rubbing at full lock (and I don’t like to drive there) so I’m...

the badlands (and first editions ) have an extra piece in the subframe about 12 inches deeper than those mounts you have there, it is an additional mounting support that hat is clearly designed for pulling forces. The 2.0 engines have an additional structure right behind the hook about 18...

I enjoy making stuff. I just can’t make money on them. lol. I also made a sweet fire extinguisher mount, quick release easy access.

Yes, I modified the Ford RAnger Lift bar to attach to the same subframe points that the factory badlands recovery hooks use; this was accomplished by boring a hole through the FRL in the intersection of the 3 x 3/8th inch bolt holes that the original design FRL mounted with. The original design...

And here is a photo of the “secure to frame” all thread and , forgive Bad angle. It’s cold out. Also I can use front crawl camera with no issues

I have the ford ranger lift bar on my 22 Bad lands. It requires removal of the factory fromt Tow hooks and mounts to the front of those brackets ONLY it does not mount to the factory installed recover frame mounts inside the sub frame (about 16 Inches behind the front bumper with a LARGE 3/4...

I’m voting sensor issue somehow, heating that much engine coolant that fast isn’t going to happen repeatedly.

That looks like the million dollar view up by Houlton .

Are there other parts required for a turbo replacement? Oil fittings , gaskets etc? And the link you posted said “out of stock” so while They sell them at that price they CANT sell one at that price now, the in stock place Might be 1350(plus gaskets, and fittings).

Danm, my 2014 forester had the battery replaced 9 months into ownership(Arizona dealers lots ain’t kind to batteries), then it was still going strong 6.5 years later when I totaled the vehicle.

I did some deep stuff here in north Maine last week (photo thread on here). It performed admirably. Lightly modified wranglers got stuck befor me.

So will this cover me if I bottom out and rip the really flimsy factory skid plate off off road?

The red stuff: Is brakes (whale mating song in reverse ), Fuel system is the 1.5’s with leaking injectors issue in would also encompass the engine reliability issue.

You might consider a 100w Walmart crock pot. Addition. Then prep food in pot, plug into inverter and drive to location and enjoy awesome hot lunch. A simple 2 bungie system keeps lid secured. (Walmart has a Walmart brand 10 dollar crockpot, I think it is 2 quart). Real Mac and cheese trailside...

Sorry “slippery” ( the icy snow flake picture one). lol .