What did you do TO your Bronco Sport today?

[Rodrigo_V_U]

But it does depend on engine power. It's power that's otherwise wasted out the tailpipe, but it's power nonetheless. It's the same kind of energy that powers a turbine engine. It was genius to realize the energy wasted out the exhaust system could be used to power a compressor.


Which is the very definition of a non-passive device.

In some Heavy trucks From Volvo and Scania, they have a system named "turbo compound".

these trucks have "two turbines" in the exhaust .... The first is connected to the compressor (regular turbo) ... after that, there is a second one, that is connected to some reduction gears and sends power directly to the crackshaft ..... A way to use the thermal energy in the exhaust gas until its limit!!!



One other consideration I like to do is that the turbo is nothing more than a thermal machine that uses another thermal machine (the engine) as its combustion chamber to provide power, hehehe

Sponsored

 

[Devbloggs]

Nice. Where did you get those from?

Just generic push in led lights. Wired to the side markers.

Used to be on my 19 Ranger but there nothing specific

 

[jhnvan]

Installed my awning and bought a 12v fridge today.

 

[Dmbleist]

Installing OEM mud flaps today.

Do you have an update about how this went? Looking to make this my next MOD and will most likely be installing myself (with help, if it would be easier for two people). TIA

 

[emaier]

I added a set of retro Satin Black bronco sport emblem to my wife's badlands today

 

[sinbuster007]

I added a set of retro Satin Black bronco sport emblem to my wife's badlands today

details where to buy? install? stick-on or rivet?

 

[emaier]

I bought them from dennis-carpenter.com. They were a rivet install but I did not want to drill a hole so I cut the posts off and then filled the back in with epoxy. Once it dried I sanded it flat and cut out a flat sheet of 3M automotive tape to match the emblem.

 

[Escape2Bronco]

I bought them from dennis-carpenter.com. They were a rivet install but I did not want to drill a hole so I cut the posts off and then filled the back in with epoxy. Once it dried I sanded it flat and cut out a flat sheet of 3M automotive tape to match the emblem.

You should be able to get these from Ford now as they are making them for the Heritage Unlimited Sport.

 

[emaier]

Correct you can get the heritage emblems now but there's a difference between the 1966 style and the 2023 heritage style. The new ones are plastic chrome and smaller.

 

[Mrmike]

Installed the hood insulation that Ford left off my '23 OBX. The correct part # is M1PZ-16738-B 1X. The cost at my dealer was $202.42. It only took 3 days to get. Perfect fit with attaching clips with it. Simple 10 minute DIY project.

 

[junlin]

My brakes were warped and just installed OEM rotors and pads last weekend. So much better.

 

[Jasonj7858]

Installed 245/70 17 VENOM TERRA HUNTER X/T tires on my 22 BADLANDS.....and 235/ 65 18 FALKEN WILD PEAK A/T W3...on the wifes 21 BIGBEND today...and new lugnuts without the crappy chrome caps...
No rubbing on the BADLANDS already installed 1 inch adapters....but extremely close..

 

[Jrl]

Installed 245/70 17 VENOM TERRA HUNTER X/T tires on my 22 BADLANDS.....and 235/ 65 18 FALKEN WILD PEAK A/T W3...on the wifes 21 BIGBEND today...and new lugnuts without the crappy chrome caps...
No rubbing on the BADLANDS already installed 1 inch adapters....but extremely close..

Question if you would , is your badlands lifted or stock lift ?I just installed 235/70/17 on my first edition badlands no lift and you are very right when you say close I have had them on for 5 days and no rub at all , somewhere between 3/8 to 1/2 inch clearance on the front tire front and back . My tires are Goodyear wranglers 235/70/17 thanks

 

[davidb1841]

Question if you would , is your badlands lifted or stock lift ?I just installed 235/70/17 on my first edition badlands no lift and you are very right when you say close I have had them on for 5 days and no rub at all , somewhere between 3/8 to 1/2 inch clearance on the front tire front and back . My tires are Goodyear wranglers 235/70/17 thanks

Where is everyone getting the BRONCO fender badge......I really like it....and your awesome tires too!

 

[Bronco2.7]

I added a set of retro Satin Black bronco sport emblem to my wife's badlands today

Those are nice!

Sponsored