What did you do TO your Bronco Sport today?

[Tigger]

I added flairs, tint, red lettering with logos on back, license holders I picked, and odd for me, a bug shield on the front per suggestions on this forum and I really like it

(hard to read the license holders but they say 1966 G.O.A.T. and then Heritage Limited Edition)

 

[C&C&C=The 3 Amigos !]

Looks great ! The back really does stands out with doing the red on sport part !
and the little red bronco on there

 

[Winds of Change]

Got one of them dirty this weekend.

 

[Winds of Change]

I wrote an email to Elana Ford who is in charge of consumer relations. I explained my bad experience with my dealer. Her office called me to apologize and gave me a $100 gift card to Ford Merch. Thank you Ford.

 

[SapphireCat]

Finally decided on a place to mount my fire extinguisher.

 

[Meanderthal]

Finally decided on a place to mount my fire extinguisher.

That is a different, or maybe additive, definition for the "Oh Sh!t" handle.

 

[SapphireCat]

That is a different, or maybe additive, definition for the "Oh Sh!t" handle.

True statement! Ha!

 

[BUMP23]

Installing OEM mud flaps today.

 

[Fordone Badlands]

Installing OEM mud flaps today.

Funny. I just picked up my front and rear splash guards today also. Also picked up the OEM Hood Deflector but need a warm day to install that.

 

[CrazyKZ]

Do either of you have wheel flares installed? I'm pretty sure that the EOM ones for the rear will fit, but not sure about the fronts.

 

[Jasonj7858]

Do either of you have wheel flares installed? I'm pretty sure that the EOM ones for the rear will fit, but not sure about the fronts.

The front will fit but have to be trimmed if you have the fender flares...easier if flares are mounted first...rear ones are no issue with flares.

 

[CrazyKZ]

The front will fit but have to be trimmed if you have the fender flares...easier if flares are mounted first...rear ones are no issue with flares.

Good to know! Yes, flares are already installed. Spacers are going on tomorrow, so I'll need something to keep the dirt off the car once the tires aren't "hidden."

 

[Bro_Spo]

OEM cargo mat install. Clear instructions, no issues.

 

[Suzysparks]

OEM cargo mat install. Clear instructions, no issues.

Step 1 - take off plastic
Step 2 - lay on cargo floor
Step 3 - congratulations, you are done!!!
Step 4 - wait, recycle the plastic. ?

 

[Fordone Badlands]

Had the garage warmed up, so after putting on the mud flaps, did the bug deflector install.
This was OEM and made by Lund. Uses 3m super tape all around to hold it.
Job came out 95% perfect.
Tip:
Have a second person to help hold it in place.
Secure the ends of the tape "liner" in place on the top side using a tape. There are many ends that need to be pulled out as it goes down and the ends tend to go back under on their own. That makes a problem trying to get the end back out since the unit is now somewhat secured.

ps: I don't know how you would ever get this tape to let go. It seems permanent now.

Sponsored