What did you do TO your Bronco Sport today?

[bdigna]

Bumper Cover - it was 70 degrees the other day . Also the Bronco Hitch Receiver Cover for the aftermarket Curt hitch that I had installed. Oh and the cargo area mat. And lastly the smoked film for the tail lights

 

[Major Kong]

I cracked this lense today ?
Looking for a replacement online if anyone sees it send me the link please.

Try this
Side Maker Lamp
You'd think it would come with the lens but who knows?
Check right or left
Would be best to call before order to confirm it's a correct part
https://parts.lakelandford.com/p/Ford__Bronco-Sport/Side-Marker-Light/98543338/M1PZ15A201B.html

 

[LilbroncoS]

I cracked this lense today ?
Looking for a replacement online if anyone sees it send me the link please.

50 bucks from parts department. Comes with whole housing.. i was going to buy in red is how i found out you cant buy just the cover

 

[dakman]

Installed the rally innovations skid plate , took about 10 minutes. Ordered 4 dd ssc1 pods to hang on light bar

 

[bdigna]

This is the link for the one I bought on Amazon.

AmazonSmile: Rear Bumper Protector for 2021 2022 Ford Bronco Sport Trunk Bumper Guards Cover Trim Accessories : Automotive

I used this one as well.

 

[Escape2Bronco]

Noted
Likely outcome of this application will be once applied no reason to remove
The "other" vehicle rear seats folded in down position 14 years ago
They've been like that the whole time
BS will be treated in the same manner
Utility cargo space
How many owners with the rubberized panels will periodically remove them?
Got a hunch, once snapped in *wipes hands* that's that!
If indeed the velco fails
Poster Jrl suggested snaps
That's my option no.2
Hold back on option no.2
Not sure if seat backs already have pre-drilled locations
Unsure of hole sizes if that is the case
If installing snaps they've got to be dead-on, no room for error

You and me both! I bought this more for the “U” than the “S”. Ordered a 2 door to replace the Lighting for the “S”. This is replacing the Escape which was much more a “U”.

Although since I bought the cargo management package, I’m finding I keep the back seat up most of the time. The Escape was folding down 99% of the time.

 

[Escape2Bronco]

50 bucks from parts department. Comes with whole housing.. i was going to buy in red is how i found out you cant buy just the cover

Maybe try one of the decals at least to provide some protection.

 

[LilbroncoS]

Maybe try one of the decals at least to provide some protection.

Matts vynil creations on etsy has tint overlays for side markers and back reflectors. 20 bucks

 

[Escape2Bronco]

Matts creative vynil on etsy has tint overlays for side markers and back reflectors. 20 bucks

Will make a good band aid for your war wound.

 

[Glamdring70]

Installed the rally innovations skid plate , took about 10 minutes. Ordered 4 dd ssc1 pods to hang on light bar

I like the close profile of that bar, but it's blocking half the adaptive cruise sensor. Does it still work at all?

 

[dakman]

I like the close profile of that bar, but it's blocking half the adaptive cruise sensor. Does it still work at all?

The close profile is what sold me on this one. I have 360+ and everything works just as it did before putting the bar on and I have used the adaptive cruise alot.

 

[bdigna]

added front window tint, rear decals, front hood protector, and rear bumper protector...add more pictures later

how difficult was the install for the front hood protector? Looked at it on Accessories.Ford.Com, but it's literally the only part that they sell that doesn't come with instructions. Even my Bronco Cargo Mat can with six pages of instructions

 

[Glamdring70]

how difficult was the install for the front hood protector? Looked at it on Accessories.Ford.Com, but it's literally the only part that they sell that doesn't come with instructions. Even my Bronco Cargo Mat can with six pages of instructions

It should. I have the smoke version without the bump... it came with this. Should be similar on both.

 

[LilbroncoS]

how difficult was the install for the front hood protector? Looked at it on Accessories.Ford.Com, but it's literally the only part that they sell that doesn't come with instructions. Even my Bronco Cargo Mat can with six pages of instructions

I have this on mine and it took 15 min. Just peel edges of tape everywhere about 2 in.. place lightly and get centered. Then start pushing from middle out.. and pulling tape as you go

 

[jazzdab]

I painted the engine cover carbonized gray and put a horsie on it.

That horse would be fun to do with heat sensitive vinyl!