Weekly Roll Call on Production (Week of 1/03/2021)

[cmosuna]

My sticker still stuck at 12/13 on the bottom and no built date or email. ECUs all checked on 12/10. That is where this is differnt than June builds. Theirs said built even when waiting on chips when they went to the lot. This is a unique position just sitting in in production.

Just about the same. 12/15 and ecus checked 12/13. Dealer reports shows Produced and has an estimated delivery of January 1-7

Sponsored

 

[69cuda340s]

My sticker still stuck at 12/13 on the bottom and no built date or email. ECUs all checked on 12/10. That is where this is differnt than June builds. Theirs said built even when waiting on chips when they went to the lot. This is a unique position just sitting in in production.

Mine was stuck In Production from June until late October. Most other June units same stuck In Production. The June units all got the dreaded 10/31 ETA just a couple weeks after production.

Maybe have someone at your dealer check Visibility Report to see if there is a hold? I waited couple weeks after my build week that is when I was told On Hold Microchip by dealer looking on Visibility Report.

 

[69cuda340s]

Just about the same. 12/15 and ecus checked 12/13. Dealer reports shows Produced and has an estimated delivery of January 1-7

If Visibility Report not showing a Hold then it might be Ford attending some details found during QA or getting train logistics figured out no one really knows. While some units get built and get put on train right away from what I have seen it is common to have some take a couple weeks before they get put on the train. When there is a significant delay the reason is usually on Visibility Report that dealer can access. So if that not showing hold that is hopeful.

 

[TnyM]

My sticker still stuck at 12/13 on the bottom and no built date or email. ECUs all checked on 12/10. That is where this is differnt than June builds. Theirs said built even when waiting on chips when they went to the lot. This is a unique position just sitting in in production.

I am still hopeful we get SOMETHING this week. Do you have an estimated delivery date here:

Seems weird that this wouldn't have changed if it was being held. But who knows...

 

[cmosuna]

Mine was stuck In Production from June until late October. Most other June units same stuck In Production. The June units all got the dreaded 10/31 ETA just a couple weeks after production.

Maybe have someone at your dealer check Visibility Report to see if there is a hold? I waited couple weeks after my build week that is when I was told On Hold Microchip by dealer looking on Visibility Report.

No holds, shows it's gone through everything just fine and has stopped at the Produced line. Just left the dealer and looked over an up to the minute report.

 

[cmosuna]

I am still hopeful we get SOMETHING this week. Do you have an estimated delivery date here:

Seems weird that this wouldn't have changed if it was being held. But who knows...

I've got the same ETA

 

[fkent]

Trucking company says my22 was deleiveried this last night or morning. Will drive by dealer this morning once sun comes up. Should be able to pickup.

 

[Pinski66]

Trucking company says my22 was deleiveried this last night or morning. Will drive by dealer this morning once sun comes up. Should be able to pickup.

Congratulations! Post picks. Ours is off the train in Warren, MI, waiting for a truck to bring it to the dealer in Cleveland

 

[Thinbluebronco]

Tracker updated this morning!! Was built yesterday 12/20!!

 

[fkent]

At the dealer this morning, arrived last night. First My22 to arrive at this dealer. Pickup once cleaned and ready later today. 3 came-in from the Mexico plant. All special order.

 

[madcat811]

My sticker still stuck at 12/13 on the bottom and no built date or email. ECUs all checked on 12/10. That is where this is differnt than June builds. Theirs said built even when waiting on chips when they went to the lot. This is a unique position just sitting in in production.

I'm right there with ya, sticker says 12/13 and ECUs all checked 12/10 but nothing since.

Updated status...
9/11 -- placed order
10/22 -- Ford emailed my VIN and a build week of 11/8
11/13 -- Ford emailed new build week of 11/29
11/24 -- Ford emailed new build week of 12/6
12/6 -- Saw the window sticker added to the tracker page, but the tracker still didn't show a date below "In Production" on the image. My dealer showed "In Production" (primary status) and "Sent to Plant" (secondary status).
12/9 -- Ford tracker still didn't have a date under "In Production" but my dealer showed my secondary status changed to "Trim Line". Unable to see any results on Etis site yet.
12/10 -- My dealer's site that pulls from Ford said "In Production" (primary status) and "Produced" (secondary status). Window sticker date changed from 12/6 to 12/13. Delivery ETA shows on Ford's tracker as 1/16.
12/21 -- Window sticker changed from 12/13 to 12/21, Ford tracker doesn't have a "built" date and I haven't received an email. Basically radio silence since 12/10 minus the sticker change (ugh)

My order: 2022 Outer Banks in Area 51 blue + Tech package + Tow package + Cargo Mgmt package

 

[Blynne]

Mine is at the dealer as well. Fkent was nice enough to snap some pictures for me. ?

I’m calling shortly to see when I can pick up.

 

[Leenaya]

At the dealer this morning, arrived last night. First My22 to arrive at this dealer. Pickup once cleaned and ready later today. 3 came-in from the Mexico plant. All special order.

Congratulations new bronco sport owner Are all three that arrived badlands? Just curious.

 

[fkent]

Congratulations new bronco sport owner Are all three that arrived badlands? Just curious.

2 were BL other not sure what it was. But I do know it wasn't a BL.

 

[MaxVelocity]

My sticker still stuck at 12/13 on the bottom and no built date or email. ECUs all checked on 12/10. That is where this is differnt than June builds. Theirs said built even when waiting on chips when they went to the lot. This is a unique position just sitting in in production.

A family member's BL is also stuck in production, although the winder sticker was updated today, so hopefully that indicates some movement. ETA is still January 11 for hers.

Sponsored