- Thread starter
- #16
YesDo you have the assist+?
Sponsored
YesDo you have the assist+?
Yeah I have the 360+ and it really didnāt mess anything up. I drive with the adaptive cruise control on whenever Iām on the interstate and it still will slow down , speed up, and center for me without a problem. It has not messed up a single sensor what so ever which is awesome.Thatās surprising. You have lights installed practically right in front of the front radar. Do you have 360+ ? If so, does the adaptive cruise control still work? If you donāt have that, what indication did you see that makes you think itās still working for things like emergency braking? If it really has no impact on the radar, I will may purchase this.
Iām not sure if you could mount them without using some other type of bracket. I think that you probably will be able to you just need to look at the mounting brackets and make sure they fit. Thanks!Do you know if the Rigid D-Series cube lights will fit instead of the RC lights? From the pics on their website the mounts looks pretty close to the front grill. It looks amazing too!
That is awesome. The beam must me narrow enough to go between those middle lights.Yeah I have the 360+ and it really didnāt mess anything up. I drive with the adaptive cruise control on whenever Iām on the interstate and it still will slow down , speed up, and center for me without a problem. It has not messed up a single sensor what so ever which is awesome.
looks awesome!!! love the blue color way too. can you show me how you wired it? min currently goes over my airbag and thatās really not a good thingFinally had a day when I wasn't on call at the hospital and installed mine. I routed the harness through a plug in the door frame and up through the steering column.
looks awesome!!! love the blue color way too. can you show me how you wired it? min currently goes over my airbag and thatās really not a good thing
Looks menacing! Great jobRough Country nudge bar installed! Install took a few hours and most of it was getting the whole bumper off. It was easy to wire through the door and the switches were mounted right under the headlight control. Installing the bar was as easy as bolting the bracket onto the chassis. Like i said the majority of the time was getting everything off of the bumper and finding hidden screws that kept the front fascia on. Overall it was relatively easy just took a while to get everything off but with the proper tools it should take around three hours. I provided a before and after photo aswell and a picture of the lights on in the dirt. Feel free to drop any questions.
Okay sweet I see what you did there thanks I really appreciateThere is a plug that pulls out. Then its pretty simple to run through the steering column.
You just made my life a lot easier when it is mine turn. So thank you sir.No problem. Made it a lot easier...probably wired the whole thing in 30 min or so
this looks fantastic, i need this. great job!Rough Country nudge bar installed! Install took a few hours and most of it was getting the whole bumper off. It was easy to wire through the door and the switches were mounted right under the headlight control. Installing the bar was as easy as bolting the bracket onto the chassis. Like i said the majority of the time was getting everything off of the bumper and finding hidden screws that kept the front fascia on. Overall it was relatively easy just took a while to get everything off but with the proper tools it should take around three hours. I provided a before and after photo aswell and a picture of the lights on in the dirt. Feel free to drop any questions.