Removing sticker from side, the triangular one

[wireman]

The AirDesign ones
https://www.airdesignusa.com/2021-2022-bronco-sport-door-molding-set.html

Thanks.

Sponsored

 

[wireman]

I particularly dislike the OBX decal that they come with. So I replaced mine with this. However I also do like the no-badge look too

Considering these.
https://www.ebay.com/itm/353404674074?fits=Year:2021|Engine+-+Liter_Display:2.0L|Trim:Badlands+Sport+Utility+4-Door|Model:Bronco+Sport|Make:Ford|Submodel:Badlands|Engine:2.0L+1999CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged|Submodel:Badlands|Engine:2.0L+1999CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged&hash=item52488f601a:g:pWsAAOSw2VNg7I6p&amdata=enc:AQAHAAABEF6tpA1izNG9dP26WJRZ1IkityPTonapmYeFeiDFSJHhC2TGZjURok89j5op69rQ0KdIv+lULQ2qsO6KhYiITUznVmBnB3qn9edtilu/d7yqNuETgJVw4ID0temoadI++f+xyetAY0zlpf2OQ6wSNSJ7n6OkB5xDY+rgqlQSuCNy9xlJZr+Zo45xLowSKttzDoYq9R3digMn1i6uMobLyJ04UJI5GU/jtk//OTSuS2WOd8QCYuaHF5Bd8TYRCLhyK2MjAqINwj3JUhMNou76shew6vGJRm9cMxdDSLL5Tcl7muQqu3xNbGw+1k8SYo80roTuyB3jRNASoH5Ix05Uj3QL0CqfS1p95w1kchnV14lt|tkp:BFBMxOzwwtJh

 

[missOutsyder]

Considering these.
https://www.ebay.com/itm/353404674074?fits=Year:2021|Engine+-+Liter_Display:2.0L|Trim:Badlands+Sport+Utility+4-Door|Model:Bronco+Sport|Make:Ford|Submodel:Badlands|Engine:2.0L+1999CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged|Submodel:Badlands|Engine:2.0L+1999CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged&hash=item52488f601a:g:pWsAAOSw2VNg7I6p&amdata=enc:AQAHAAABEF6tpA1izNG9dP26WJRZ1IkityPTonapmYeFeiDFSJHhC2TGZjURok89j5op69rQ0KdIv+lULQ2qsO6KhYiITUznVmBnB3qn9edtilu/d7yqNuETgJVw4ID0temoadI++f+xyetAY0zlpf2OQ6wSNSJ7n6OkB5xDY+rgqlQSuCNy9xlJZr+Zo45xLowSKttzDoYq9R3digMn1i6uMobLyJ04UJI5GU/jtk//OTSuS2WOd8QCYuaHF5Bd8TYRCLhyK2MjAqINwj3JUhMNou76shew6vGJRm9cMxdDSLL5Tcl7muQqu3xNbGw+1k8SYo80roTuyB3jRNASoH5Ix05Uj3QL0CqfS1p95w1kchnV14lt|tkp:BFBMxOzwwtJh

Cool. Would love to see them if you take the plunge

 

['Cause]

I'm actually way west as in Lake Havasu.

I used the good old az sun on a 120 degree day, came right off along with the sport on the back.

Hadn't thought about the SPORT...

 

[Robink]

I particularly dislike the OBX decal that they come with. So I replaced mine with this. However I also do like the no-badge look too

I took the badges off my BB. I hated them. Used a hair dryer.

 

[Robink]

From what I understand I can take the "sport" off the back the same way? I used a hair dryer with the badges. Yes?

 

[Oso Fell]

I particularly dislike the OBX decal that they come with. So I replaced mine with this. However I also do like the no-badge look too

Love the badge. Question. Did you install the body side moldings? If so, was it difficult. Any advice? I’m going to install them tomorrow.

 

[Hot Rod Mike]

Has anyone removed the 'factory' sticker from the side, the triangular one such as: BIG BENDS, OUTER BANKS...

Is it just a 'sticker' that could be heated with a hot air gun and peeled off?

Just would prefer a clean look to the side.

Hammer and a chisel

 

[missOutsyder]

Love the badge. Question. Did you install the body side moldings? If so, was it difficult. Any advice? I’m going to install them tomorrow.

Sorry, I can’t help you, I asked my ceramic coating guy to install them along with the fender flares, prior to ceramicking everything. He did it for an extra $50. He did eff up on the badges though as he installed the new badges prior to the mouldings and because they were in the same place as the stock badges he took off, they got in the way. So he removed the badges and I had to order a new set as they bent. But he paid for them. Good luck! I think the mouldings look brilliant.

 

[Oso Fell]

Sorry, I can’t help you, I asked my ceramic coating guy to install them along with the fender flares, prior to ceramicking everything. He did it for an extra $50. He did eff up on the badges though as he installed the new badges prior to the mouldings and because they were in the same place as the stock badges he took off, they got in the way. So he removed the badges and I had to order a new set as they bent. But he paid for them. Good luck! I think the mouldings look brilliant.

Thanks!

 

[Mwittke5857]

Has anyone removed the 'factory' sticker from the side, the triangular one such as: BIG BENDS, OUTER BANKS...

Is it just a 'sticker' that could be heated with a hot air gun and peeled off?

Just would prefer a clean look to the side.

Mine were weather-worn and I thought the "Sport 4X4" decals on the rear quarters would look better. I just (slightly) heated them with a heat gun and they pealed right off. I used a 30% solution of 90 alcohol/water to remove any glue left behind