What did you do TO your Bronco Sport today?

[hcrews1955]

Added a Dashboard Storage tray along with some 6mm to 1/4-20 adapters from McMaster Carr to install the Bulletpoint Mounting Solutions phone/accessory holders.

 

[jkernitzki]

LED-ified the rear turn signals. Still wonder why that isn’t the standard.

 

[TheDude]

LED-ified the rear turn signals. Still wonder why that isn’t the standard.

Yea its ridiculous to save a few bucks.
What bulbs did you go with?

 

[jkernitzki]

Yea its ridiculous to save a few bucks.
What bulbs did you go with?

https://www.amazon.com/Alopee-921-Lumens-12-18V-Yellow/dp/B06Y2GQP23?pd_rd_w=1JpE6&content-id=amzn1.sym.fd6fa53e-6c6a-4638-b35e-7821b42c64ec&pf_rd_p=fd6fa53e-6c6a-4638-b35e-7821b42c64ec&pf_rd_r=PWMS08KCKYWYYG1WWQJ1&pd_rd_wg=S6bCE&pd_rd_r=ad1b5369-b62b-4728-8e54-febb7f3ebd1a&pd_rd_i=B06Y2GQP23&psc=1&ref_=pd_basp_m_rpt_ba_s_1_cp_sc

 

[RSH]

Badlands went to the dealer for "The Works Package" and the recalls for the battery inspection along with the body control module and powertrain control module calibration updates.
When I picked up the Badlands after the service it seems like it runs better than it did when I dropped it off, we'll see how that plays out.

 

[Putter Boy]

LED-ified the rear turn signals. Still wonder why that isn’t the standard.

LED-ified the rear turn signals. Still wonder why that isn’t the standard.

This Red LED will work for the break lights very well.
Red Break Light LED link

 

[Putter Boy]

This Red LED will work for the break lights very well.
Red Break Light LED link

This is the link for the LED Reverse lights it works very well and super bright.
Amazon LED Reverse tail lights

 

[jkernitzki]

This Red LED will work for the break lights very well.
Red Break Light LED link

This is the link for the LED Reverse lights it works very well and super bright.
Amazon LED Reverse tail lights

I was planning on both, but wanted to get the turn signals out of the way first since they bothered me the most.

 

[Putter Boy]

I was planning on both, but wanted to get the turn signals out of the way first since they bothered me the most.

As a side note, the Amazon website will tell you it will not fit a model year 2025 bronco sports Badlands Sasquatch, but they worked perfectly and this is the only red LED that has the built-in resistor. That will not cause the rapid flash as well as the link to the reverse lights. They’re all three different brands. This is the only configuration I have been able to find that does not cause the rapid flashing.

 

[jkernitzki]

And then there's the tool roll (so many things to make it road trail ready!):

 

[jkernitzki]

As a side note, the Amazon website will tell you it will not fit a model year 2025 bronco sports Badlands Sasquatch, but they worked perfectly and this is the only red LED that has the built-in resistor. That will not cause the rapid flash as well as the link to the reverse lights. They’re all three different brands. This is the only configuration I have been able to find that does not cause the rapid flashing.

Yeah, I've learned to scrutinize what believe or not where it come to Amazon's fitment checks.

 

[Tossty]

Today installed Enkei Matrix Wheel and really liked the combination.

 

[rugedraw]

Installed a K&N drop in filter and VTA mod yesterday to go along with the Livernois tune. Also ordered some LED front and rear bumper reflectors, LED fender side markers and as well LED bulbs for the reverse lights that look yellowish when they light up. After reading @Putter Boy comment, seems like I may need to return them and get ones with the resistor.

 

[jkernitzki]

Added a little memory aid for my increasing absent-mindedness:

 

[Putter Boy]

Added some hash tags .......