New Year, New Vehicle!

[Luis@UG]

Working with @Underground Graphics has brought me into a new world! I love these Broncos! Being so involved now with customers and the graphics I'm wanting to order my own. Thinking of a Desert Sand Badlands. Completely will worth the wait.

So for next year, I'm already planning exterior/ interior/ suspension and performance mods. Wanna give an special thanks to all the members on here, for all the posts and comments. They are really helpful.

So, I'm thinking to get a lift that give enough height to run, bronze wheels with 33's- 35's without rubbing, some aftermarket off-road lights, etc.

As for the exterior graphic, I'm between 2 graphics.

Bronco Sport Retro Side Panels (antique bronze)

or

Bronco Sport Topography Stripes (antique bronze) with matching hood Hood Topography Two Color (3 pieces), Rear Hatch Rear Hatch Inlay (2 color) and to protect the Piano Black pillars Bronco Sport Pillar Graphics


What are y'all thoughts?

Thanks in advance and Happy Holidays!

Luis

 

[cprcubed]

I'm assuming you're wanting a Full Size Bronco? You won't be able to fit 33-35's on a BS without a ton of mods (if even possible). Cheers!

 

[EARLSAYS]

Why not both the hood and side graphics?

 

[Luis@UG]

Why not both the hood and side graphics?

From the topography kit?
The Retro Panels comes with hood, side graphic and hatch inlay as a kit
Love the way your BS hood looks.

 

[Luis@UG]

I'm assuming you're wanting a Full Size Bronco? You won't be able to fit 33-35's on a BS without a ton of mods (if even possible). Cheers!

Do you know how big on tire size I can go with? TIA

 

[EARLSAYS]

From the topography kit?
The Retro Panels comes with hood, side graphic and hatch inlay as a kit
Love the way your BS hood looks.

I am looking forward to the two added outer pieces coming soon thanks to your shop.

 

[Escape2Bronco]

Do you know how big on tire size I can go with? TIA

Approximately 30 inches or 245/65-17 or 245/70-17 depending on the tire. Adding a lift does not help. Plenty of posts regarding tire sizes and fitment.

 

[Summit]

.....So, I'm thinking to get a lift that give enough height to run, bronze wheels with 33's- 35's without rubbing.....

I've been doing suspension mods on 4x4's for 40+ years and if there is one thing I've learned it is
to know your limitations on the Vehicle you plan to mod. I just don't see this as a reasonable achievable plan. I use my Bronco Sports on and off road and remember these newer vehicles are very complex with multiple sensors and computer operated systems - including the transmission. Both my Big Bend and Badlands are lifted with bigger tires "within reason".

You go 'beyond' 1 or 2 inches on lift (depending on the model Bronco your have and engine size) and you will surely deal with multiple problems within the original designed systems. Even tire size exceeding what will actually fit will certainly change many things within the systems that keep the vehicle running and performing optimally. Everything is a trade off.
Sure you can chop and set your joints at excessive angles but it will surely not last.

Having said that I think the graphics all look great and if the vehicles shown above were lifted and ran bigger tires than stock that fit - they would look even better than pictured.
Anything is achievable with deep pockets but if you really want to enjoy the Bronco Sport for any amount of extended time don't push the limit of its' design too far.

Sponsored