A quick search on google has plenty of images for pinout......
https://www.google.com/search?q=ford+impb+pinout+diagram&sca_esv=f1741e22100d48d7&rlz=1C1MKDC_enUS772US772&sxsrf=AE3TifNZ6Wm_lTv8QubfkSrEGJ2F7gFL0w:1767291202170&ei=QrlWafiRCtf-p84Pia_M0Aw&oq=ford+IMPB+pinout&gs_lp=Egxnd3Mtd2l6LXNlcnAiEGZvcmQgSU1QQiBwaW5vdXQqAggAMgUQIRigATIFECEYoAEyBRAhGKABSPgvUK0LWLEfcAF4AZABAJgBdKAB4QWqAQMzLjS4AQHIAQD4AQGYAgigAvQFwgIKEAAYsAMY1gQYR8ICBhAAGA0YHsICCBAAGBYYChgewgIIEAAYBRgNGB6YAwCIBgGQBgiSBwMyLjagB9AUsgcDMS42uAfxBcIHAzMuNcgHCoAIAA&sclient=gws-wiz-serp
What year is your sport?
I wonder if this AI dribble is close to accurate
And does the 2025 with the 360-degree camera system have an APIM?
The Image Processing Module B (IPMB) in a Ford Bronco Sport manages the multiple camera inputs (like the 360-degree camera system) and sends a single video output signal to the main infotainment screen (APIM).
Due to the complexity and proprietary nature of modern vehicle electronics, a universally available, simple pinout diagram for the IPMB module connector is not a standard public document. Ford provides this specific technical data through their official service channels and professional diagnostic tools (like Ford FDRS software or official repair manuals).
IPMB Location (General)
On some Ford vehicles, including the Bronco Sport, the IPMB is generally located in the rear trunk area of the vehicle.
And does the 2025 with the 360-degree camera system have an APIM?
The Image Processing Module B (IPMB) in a Ford Bronco Sport manages the multiple camera inputs (like the 360-degree camera system) and sends a single video output signal to the main infotainment screen (APIM).
Due to the complexity and proprietary nature of modern vehicle electronics, a universally available, simple pinout diagram for the IPMB module connector is not a standard public document. Ford provides this specific technical data through their official service channels and professional diagnostic tools (like Ford FDRS software or official repair manuals).
IPMB Location (General)
On some Ford vehicles, including the Bronco Sport, the IPMB is generally located in the rear trunk area of the vehicle.
Actually on further searches the AI info above looks reasonably accurate and applicable to 2025 Bronco Sports with the 360-camera system but was unable able to locate the pinout
Any with 2025 Ford Service Manual / Wiring Diagram Access (Motorcraft Service / OASIS) can find the IPMB section under “Parking Aid - Vehicles With 360° Camera.
Any with 2025 Ford Service Manual / Wiring Diagram Access (Motorcraft Service / OASIS) can find the IPMB section under “Parking Aid - Vehicles With 360° Camera.
I figured it was 21-24 because the 2025 models only have an IPMA and no more IPMB.
Instructions to get to it are attached. This is what it looks like once you get there. Seems to be under the console. PITA.
Based on the diagram Ford shows in PTS, it looks like it's mounted to the floor between both front seats under the console.