Search results

I have a 2024 BS. I bought one of those wolfbox dash cam mirrors. I’m curious if anyone has come up with a 3D printed camera housing for the back up camera? I’d love to mount higher up, above the lift gate. thanks For the suggestions.

I bought this for my ‘24 BS. Decides I didn’t want to install. Apparently I set a combination and can’t seem to remember what it is. Since it wasn’t installed I was able to remove the rear bolt and remove the lock. Selling without the lock and install screws. As I can’t find the screws that came...

Looks great. I have the 20’ light bar sitting in my hobby room. I just haven’t had time to install. Also have the blackout letters. Eventually I’ll get around to it all. Have some other lights to install. Ditch lights, side lights. And if I feel up to it, flush mounted rear bumper lights. If I...

2 weeks ago took my 2024 in for oil change and tire rotation (roughly 26,000 miles). Was told I had a slight coolant leak and I should keep an eye on it. I asked if it was a warranty repair. Was told it was. So told them to keep it until it was fixed. Day later and I had it back. Water pump...

funny you posted this. I happen to come across those and purchased a set. I just haven’t installed them yet. I did order some touch up paint. Was going to fix the spot and then install. But between my job and the weather. I just haven’t found the right time.

The rear camera bracket you used. Is that from someplace else, or is it the bracket that comes with the camera? I wanted to mount up high. Was thinking of mounting on the roof, and route the cable in that grove and would only have maybe 3 inches exposed. But I’m intrigued by how yours is mounted...

Looking forward to receiving mine. I preordered last week. Do you know. I added OEM bracket, in hopes it will work with the Bronco Sport. Do you know for if it will or not?

just looked. Yeah, the one I bought from Amazon is smaller. I will say this. The one in my 24 OB is rubber. Not plastic. Im sure i’ll be able to slice it to allow cable pass through.

I haven’t fully verified it first but looks like it will. Haven’t had a chance to do the install yet. My work is killing me and taking all my time. MSIZOY Engine Compartment Plug... https://www.amazon.com/dp/B0CJ5C992X?ref=ppx_pop_mob_ap_share

while I can’t answer for him. I have a 2024 and right behind the battery is a nice big removable grommet. I ordered a replacement on Amazon for $7 that allows cables and wires to pass through. It is right behind the pedals and easy to get to in the cabin.

unfortunately I don’t. But I like how that looks.

You got me thinking about this. I’ve committed myself to mounting the 2 inch cubes to A pillar mounts now. But Rough Country makes a flush mount set that I could mount in the rear bumper. That plastic bumper wouldn’t be too hard to cut into. I might have to pick up a set of thos

I’ve ordered a set of RoughCountry 2 inch light pods. I have the Ford OEM cross bars. Im wanting to mound the 2 square lights under the cross bar. One on the left and one on the right. I have 2 questions. 1. Will they be sitting too far back to be an effective light. I’m really looking for...

Hi, was detailing the BS Outerbanks just now and I noticed this on the drivers door side. Does something like this constitute a warranty claim? My body has a few minor scratches that are my fault. But can’t think of anything I’ve done that could have caused this.

How did you blackout the 3rd brake light? Do you have a link to that part? I have the blacked out letting (front and back). Just waiting for warmer weather to install.

Ive been google searching, but haven’t come up with any solutions. I want to mount a couple floods rear facing. Does any one know of any good looking clamps that could mount to the side rails? Or another option I like is installing cross rails and using the cross rail as the mounting point...

P Perfect, Thank you. I do have the set of plastic trim tools. Now I know my insulated wire will fit.

This might be a dumb question. But the 18 gauge wire you ran is a standard 2 conductor wire? I purchased some and it seems thick for tucking. You didn’t just run the 2 wires without the wrap (just the back and red coating?). Or were you able to tuck the 2 wires in their black wrap? Does that...

Were you able to tuck in the weather stripping going down the windshield? Been watching a video of removing the cover down the A pillar. Would love to be able to tuck. Save time and the possibility of me breaking something.

Really like your setup. So much so I bought this rigid light kit. Can you tell me what gauge wire you used to wire your lights up? I’ll be wiring mine to an auxbeam switch box. Is 18 gauge too small? thanks