Search results

Thanks that looks like a good spot will try to go through there.

I'm powering up my Trigger 4 plus wireless controller from taped 3 keyed power . and running over and out through driver door plug. Running wires through anywhere around dash is a challenge. making hole is an option but looks dangerous to hit something stuff all over the place on both sides.

Tapped into Number 3 trying to get it across to drivers side any tips. Yes engine compartment box looks like nightmare. and trouble. Anybody know where the wires are located for the aftermarket lighting fuse.

Can you share the information on the engine compartment fuse for aftermarket lighting i think that would be very helpful not only to myself but many others also. Thanks

Any one run a wire from passenger fuse box to driver side kick panel area ? Any tips and easy routing without taking apart half the dash , or where to feed it through.

Like to thank whoever suggested to use grommet on driver door post. Just used this method it is very easy I just used a piece coat hanger at a downward angle and fiddled around a bit and it goes right through near brake pedal. Tape string or wire and pull right through. Thanks again works great

On my Ranger there was a plug and play kit that used side marker plug. Until someone comes up a similar set up have to hard wire into it.

Diode DynMICS DIODE DYNAMICS site also have them on Amazon

They have a fog light kit for bronco sport think you can reto fit it to the stock location pretty easily. they have a video of the install.

Anybody add a louder horn of any kind what's your experience and thoughts ?

Trigger control states the yellow keyed wire draws milliamps does it have to have separate feed or can you just tap into any 12V source.

What number fuse space did you jump and use for the power to controller in the inside fuse block that was keyed. Thanks

We have to find keyed power preferably in the engine bay so we don't defeat the purpose of being wireless to the interior. Maybe something in engine bay fuse box. Anyone with some help here would be greatly appreciated by many of us to find a power source under the hood. must be keyed on. Thanks !!

Where did you tap for the for the keyed power ?

Anybody using Trigger Control wireless switch set up. Feedback on how you like it and any comments on its use.

Don.t remember believe it was on some trims or previous year but whatever they where the same headrest for folding option but didn.t have the release button on the side it was an easy modification just removed upholstery put something to activate the catch. Piece of wooden dowel was easy for me...

Check the headrest, my 2020 ranger actually had the folding headrest without the button all you had to do was remove the cover and you could see the space for it. I just put a piece of wooden dowel in the hole the correct size worked perfectly. you could activate them buy pushing on the dowel...

Why not try and put a jack under the low side and try to give it a little twist ?

Anyone change there wiper blades ? What did you use. What sizes did you use that fit. Checking different site some state sizes anywhere from 24 to 22 for drivers side and 22 to 20 for passenger side. I thought they where 22 and 20. Can someone help with this confusion.

Anyone have the Rally Innovations light bar. How do you like it ? Any thoughts comments ?