Search results

It beats everything being "exponential," or YouTubers' "I'm not gonna' lie," while overly using "as well" for every feature of the car they describe. The latter is especially annoying in YouTube car reviews. One exceptional reviewer avoided using "As well" and instead abused "and most...

I added Drawer Pulls to my console tray. It's a bit difficult to remove the tray to access the lower area when filled up with junque! https://www.broncosportforum.com/forum/threads/what’s-your-favourite-non-ford-part-you’ve-added-to-your-bs.8572/post-202858

And for that reason, keep an 8mm socket, ratchet drive, and extension in your car. I also keep a 10mm socket, 13mm socket, and a couple of common sized Torx bits in my small tool kit. The Bronco door removal toolkit is a good start, although the prices on Amazon are lower than the genuine Ford...

I bought Brake light and backup light LEDs from Diode Dynamics. All are CANBUS error free, meaning no flash errors. Diode Dynamics doesn't stock the amber turn signal LEDs for our Bronco Sports, and I bought those on line. All of these were CANBUS error free, Plug and Play - no resistors...

After every service visit, your Ford service manager gives you a printed receipt with a breakdown of the services performed and parts and materials used for every service. That service visit is logged into the Ford computer system. You can file these printed docs for your own piece of mind (I...

Wife, husband, girl or boy friend, or kids, each have separate ways to handle the "noise.".

I didn't catch that you had replaced the factory fogs. As for the Lamin-X , I did the installation on a hot day in my garage and used a hair dryer. Also, I did use a dish soap solution for repositioning. The Lamin-X films I bought were pre-cut. They just wouldn't conform and I gave up on using it.

Did you use LaminX films? I bought them and could not get them anywhere close to setting down without a hug kink and bubble. The film was thick and didn't seem to have any strtch or give. I peeled the one off I tried and tossed them.

I've had AAA for 7 years now. Even with Ford's Roadside Assistance, I decided to just keep it and not cancel and rejoin when the Ford Roadside Assistance expires.

Thanks Tim. for changing that, I've delete my earlier comments and objections. My faith is restored! :)

It depends on the type and depth of ghe snow. Sometimes Sand mode is preferred to be able to power through wet snow without the power being cut. That will happen in slippery mode.

Ice, snow, mud build-up on the cardboard streamlining covers (these are not skid plates), is one issue. Some folks have found a loose heat deflector near the catalytic converter or other part of the exhaust causing a clunk or rattle.

That is normal for a direct injection engine. My '17 Escape sounded like this also. It's been variously described as a sewing machine or as diesel clatter.

Original headlight connectors shown here: Passenger Side Driver's Side

There are 2 wire and 3 wire versions of the Tectico and DZG side markers. The products appear to be identical between the brands. The 3 wire version is for the DRL (white LED) with amber turn signals. The 2 wire version has amber LEDs only. As for the wiring, there are a number of posts...

Desert Sand was first offered on the Bronco Sport for the '24 model year. Azure Gray Metallic also replaced Area 51 for the 2024 Model Year. The Maverick calls the Desert Sand "Terrain," same color code, I've read.

Not necessarily. cprcubed has LX6T-10655-A, not -FA. If service techs just go by the exact product ID, then maybe not. If they do a load test and find a bad cell, then maybe.

For any used car one might be interested in, check the NHTS website to see what recalls have been anounced for that Year, and model. If you have a specific vehicle in mind, get the VIN chassis number and check if the recalls have been complied with.

In Production definition... https://www.broncosportforum.com/forum/threads/few-things-i’ve-noticed.10554/post-182087 "In Production" does not mean being assembled. The first day of "In Production" is when the order is sent from corporate to the factory. Assembly commences about 7-9 days...

It was in an advanced dealer notice of recalls, reported on Long McArthur's weekly YouTube stream 2 weeks ago. info starting at approximately 1:08:50 When it was reported in this live stream I wrote down the Bad battery number and then checked the battery number in my car even though my car...