Solid Versatile Phone & Tablet Holder

[NJBronco]

After trying out several phone mounts, I finally found one that is PERFECT! It is rock solid, ideal location, and so versatile it can even fit a tablet up to 12.9 inch. I am using my 2021 iPad mini which is a perfect size.

Sold on Amazon:
Spin Bike Tablet Holder Mount, Phone iPad Holder Stand Exercise Bike Handlebar Mount For Stationary Bicycle, Treadmill, Microphone Stand, Fit For iPad Pro 12.9, Air, Mini, Galaxy Tabs, iPhone(4.7-13”) https://www.amazon.com/dp/B091GDKSK7/ref=cm_sw_r_apan_glt_i_57Q0EW35XWGMSWKK6XNS?_encoding=UTF8&psc=1

Sponsored

 

[ElCameron]

This does look pretty sharp. Although I’ve found myself less in need for a phone holder when I have CarPlay.

OT but I’m actually curious about disabling the wireless charger. Since you need to plug-in anyway.

 

[AllTerrain]

After trying out several phone mounts, I finally found one that is PERFECT! It is rock solid, ideal location, and so versatile it can even fit a tablet up to 12.9 inch. I am using my 2021 iPad mini which is a perfect size.

Sold on Amazon:
Spin Bike Tablet Holder Mount, Phone iPad Holder Stand Exercise Bike Handlebar Mount For Stationary Bicycle, Treadmill, Microphone Stand, Fit For iPad Pro 12.9, Air, Mini, Galaxy Tabs, iPhone(4.7-13”) https://www.amazon.com/dp/B091GDKSK7/ref=cm_sw_r_apan_glt_i_57Q0EW35XWGMSWKK6XNS?_encoding=UTF8&psc=1

Now that looks like a sturdy attachment point thanks for posting

 

[VortexSigns]

I figure I throw a few your way

 

[DMEARC]

That ipad seems to block a lot of buttons. May I ask what you use that for?

 

[NVSport]

After trying out several phone mounts, I finally found one that is PERFECT! It is rock solid, ideal location, and so versatile it can even fit a tablet up to 12.9 inch. I am using my 2021 iPad mini which is a perfect size.

Sold on Amazon:
Spin Bike Tablet Holder Mount, Phone iPad Holder Stand Exercise Bike Handlebar Mount For Stationary Bicycle, Treadmill, Microphone Stand, Fit For iPad Pro 12.9, Air, Mini, Galaxy Tabs, iPhone(4.7-13”) https://www.amazon.com/dp/B091GDKSK7/ref=cm_sw_r_apan_glt_i_57Q0EW35XWGMSWKK6XNS?_encoding=UTF8&psc=1

Just got one of these, solidly built, fits great! Thanks for the lead on it!

 

[KodiakMomCrawler]

Wow! Wasn’t expecting to see the tablet on there! Good find! My only concern is if it damages the ledge it’s adhered to.

 

[VortexSigns]

Wow! Wasn’t expecting to see the tablet on there! Good find! My only concern is if it damages the ledge it’s adhered to.

Seems like a very large holder. We offer a small attachment for a phone that expands 3x to take the tablet

 

[FirsandFire]

After trying out several phone mounts, I finally found one that is PERFECT! It is rock solid, ideal location, and so versatile it can even fit a tablet up to 12.9 inch. I am using my 2021 iPad mini which is a perfect size.

Sold on Amazon:
Spin Bike Tablet Holder Mount, Phone iPad Holder Stand Exercise Bike Handlebar Mount For Stationary Bicycle, Treadmill, Microphone Stand, Fit For iPad Pro 12.9, Air, Mini, Galaxy Tabs, iPhone(4.7-13”) https://www.amazon.com/dp/B091GDKSK7/ref=cm_sw_r_apan_glt_i_57Q0EW35XWGMSWKK6XNS?_encoding=UTF8&psc=1

Yeah I just ordered one of them. Thanks for posting that, it looks fantastic!

 

[NJBronco]

That ipad seems to block a lot of buttons. May I ask what you use that for?

9 out of 10 time I have my phone on it. I also wanted to be able to place my iPad mini for those time I sit and wait parked. Those moments it comes in handy to sit at an airport cellphone lot and watch something. I agree it is big which is I use my phone to hold daily basis. Also since Android auto or Apple car play reuired to be plugged in, this is perfect spot too charge and hold the phone.

 

[NJBronco]

Wow! Wasn’t expecting to see the tablet on there! Good find! My only concern is if it damages the ledge it’s adhered to.

It's clamped on and clamped pretty good. I have not seen any damages that I can report. Also I would not go beyond ipad mini.....

 

[haroldqjr]

Wow! Wasn’t expecting to see the tablet on there! Good find! My only concern is if it damages the ledge it’s adhered to.

I think this mount will still work with it but I did find this on thingiverse https://www.thingiverse.com/thing:5173047 it does need to be 3d printed but some services may exist for someone to do it for you. It does look like it would cause less stress.

 

[Hot Rod Mike]

Useless

Sponsored