2025 bronco sport Big Bend, black diamond package auxiliary switches wiring

DAHUNTER

Base
New Member
First Name
Steve
Joined
Jul 18, 2025
Threads
2
Messages
2
Reaction score
6
Location
Cadillac Michigan
Vehicle(s)
2025 Bronco Sport
Hello to the group. I am trying to locate the pre-ran wiring from my auxiliary switches on a 2025 bronco sport Big Bend.
Sponsored

 

jkernitzki

Badlands
Well-Known Member
First Name
John
Joined
Dec 13, 2024
Threads
46
Messages
1,108
Reaction score
2,810
Location
Arizona
Vehicle(s)
2025 Badlands Sasquatch

xtinction

Big Bend
Active Member
First Name
Rich
Joined
Mar 22, 2025
Threads
7
Messages
36
Reaction score
37
Location
Florida
Vehicle(s)
2025 Bronco Sport Big Bend w/Black Diamond Package
I note that the double run seems to be reversed. In the diagrams it appears that the passenger side is supposed to have the two ends for the 2 switches. The aside with the higher voltage switch. It in actually is reversed. The driver side has the double run.
You will need to remove the inner liner around the wheel well to get to the ones located there. The last on the in engine compartment is fairly easy to locate. I used that for grill ditch lights. Simple install. Love those aux switches!
 

The_Jimmer

Badlands
Well-Known Member
First Name
Robert
Joined
May 3, 2023
Threads
3
Messages
102
Reaction score
166
Location
Georgia
Vehicle(s)
2025 Badlands Sasquatch / Desert Sand
I note that the double run seems to be reversed. In the diagrams it appears that the passenger side is supposed to have the two ends for the 2 switches. The aside with the higher voltage switch. It in actually is reversed. The driver side has the double run.
You will need to remove the inner liner around the wheel well to get to the ones located there. The last on the in engine compartment is fairly easy to locate. I used that for grill ditch lights. Simple install. Love those aux switches!
Could you perhaps show some pictures of where you ran the wires and your setup? I want to install some KC style lights in the middle of my stock pushbar but have been waiting for some better install posts to start the project.
Sponsored

 
 







Top