Search results

Update since my January 20th post: Received a call from the dealership service department a few weeks back saying Ford wasn't "releasing" the PTU for shipment until March 3rd! Not sure when they would even receive it! Spoke with someone with the TX DMV and they suggested I go ahead and file a...

My ‘21 BB has been at the dealership for the last month. I think we have the same problem, sounds almost like something was rubbing and causing a faint whine that gets louder at highway speeds. Initially they acted like the couldn’t hear it. Took off the cargo lid and the tech immediately heard...

Ordered a JBL BassPro Hub for my BS BB. I have the towing package so it comes with the full-size spare. I had to hunt down some mounting hardware because JBL only includes an M8 mounting post. Ordered an M10 threaded rod from Grainger and cut it down myself. Picked up the M10 wing nut and fender...

Got it figured out. Had to order an M10 rod from Grainger and cut it down. Picked up the rest of the hardware from Home Depot. My boy works for Best Buy as a car audio installer, getting it wired up this weekend. The M8 mounting post from JBL: My pain in the ass M10 mounting post:

I’m installing a JBL BassPro Hub into my BS BB. It fits perfectly in my full-size spare, but the mounting post JBL included is too thin. I need to get a threaded rod and cut it down to secure the subwoofer. I have the part number for Lug Wrench Stud Retainer. I can’t figure out if the BS uses...

Ordered the parts to my home and did it myself with tips from Viking’s earlier post. 1. Used a little anti-seize on each screw and got those in first. 2. Carefully cut the two small zip ties with some cutting pliers. Make sure to not cut the tubes or their insulation. Also, make sure to not...

All is right in the world. LOL My salesman was a douche about it, these dealerships kind of have us by the balls nowadays. I'm 100% positive my Subaru dealership would have just ordered me a cover had I bought a new Subie. I signed up for a Ford Pass Visa and I had a $100 credit, so I used...

So is the white stud that was left behind when your removed the brace the one that’s attached to the cover before they made the change, or do we have to order the “special stud” from the part diagram? Did just pulling it straight up work in removing it, or did you have to pull apart the little...

I ordered all the parts this morning. Hopefully I don’t run into any problems, sucks I had to spend $125 on something that should just be on the vehicle I purchased. Is this a Loctite situation on the the bolts or should I do the install without?

Correct me if I am wrong, but for the 1.5 we need Part Numbers: #1: JX6Z6A949B is the actual cover and it includes the 3 studs, part #2: AA5Z6N958A. #3 DT1Z6A957A is the longer white stud. What is part #4 JX6Z9K540B, and where is it on your picture? Do we need this?