Search results

It's pretty easy. I was able to attach to original bolts for the mount and just used L brackets painted black to mount. The hardest part is routing the wire into the interior because of the thickness

Just installed a 6 gang auxbeam switch controller. Works great, cleans up the engine bay of relays/wires and stops any unnecessary battery drain.

Added new awning

Just attached a license plate cover to this, worked great https://www.amazon.com/dp/B08XM6BTTD/ref=cm_sw_r_apan_glt_fabc_VK9EXV7HKASCG2CTKB9B?_encoding=UTF8&psc=1

New auxbeam ditch lights They are super bright

Etsy

I've seen that but this option is much cheaper?

No issues yet only a message in the autoss screen on the dash which I never look at. The button works but is pointless due to autoss being disabled. Still playing around to see if the button can reactivate autoss without a computer

Just removed auto start/stop with forscan doing the pscm method and it works great, no warnings or bcm turned off PSCM 730-03-01 xxxx xxxx 00-

I use the camera as a trail camera. The angle is perfect to see obstacles on trails in front of the car since the hood is so large

I added a wire conduit through the wire access behind the battery it also allows for future routing

1.4" Short Carbon Fiber AM/FM Radio Antenna Aluminum Black Vehicle Car Aerial Universal Replacement by GTP https://www.amazon.com/dp/B01LZK5IRN/ref=cm_sw_r_sm_apa_glt_fabc_4450C6K76YA6SRQNPQWK?_encoding=UTF8&psc=1

It's attached to the bumper skin only. There are access holes to get to the bolts for the engine cover if it needed to be removed but not attached to it. Didn't think it was necessary to attach to the bumper front bar

It's a wireless camera setup with screen from Amazon. It supports multiple cameras so you could have one in the front as a trail camera and one on your dash as a dash cam .

The bumper has to be removed and lighting is routed before you put the bumper back on. The switch gets routed through the firewall access point behind the battery to inside

I added threded inserts to the bottom of the bumper and used bolts to attach it. It also has holes allowing access to the original bolts under attaching the bumper to the car. So the the bumper can be removed without removing the skid plate

The switch is under under the other light switches on the left driver side. I went through the wire access grommet behind the battery to get the wires inside the cabin

I made it out of steel diamond plate. I couldn't find one to purchase

Just added mine with a mount for a front license plate and front camera in an outer banks