Search results

No, very easy, just follow the video.

I have, I installed my dash cam a few months ago and it's been great 0 issues, I have also used dongars in other vehicles too.

Looks great, much better.

Look really good, where did you power it from

Have you checked the water pump, from what I have read people only knew their water pump was leaking when they saw liquid on the hood and fender.

Before I did my cubby mod, I went the factory route, and honestly could barely tell it was on, these look like they are going to give much more light off, is this going to be mounted in the same location as the factory one or somewhere else in the cubby area. Are you going to drill a hole in...

Mines been out in some bad storms recently and have not seen it on mine, That's weird..

LOL. They were pics from a print out the dealership gave me. So, good news, I fixed it for $32, I got the harness from ebay LX6T13A840, it was a PITA but its done, I wrapped the wire and as much of other wires with some fine stainless steel wire mesh and sprayed a heavy dose of peppermint oil...

Well shoot, looks like a fkin mouse got to the wiring, that little fcker is gonna cost me just under a thousand bucks for 2 pigtails.

I'll give this a shot this weekend

Sorry, forgot to reply, so we're talking just tye brackets and hardware right, it would cost too much to ship the whole shelf. These are like pretty close to $100 with shipping, I'd sell mine for $60 inc shipping.

Sell you mine, the quality is great, but the roads around me are pretty bad i couldn't do with the rattling and had to take the shelf out.

I had a bad ground a few weeks ago that caused all sorts of issues, the ground located near the drivers side fender was loose. I fixed that and it's been fine since, I did check it again and it's still tight. I tried disconnecting the battery cables for a cpl of hours, first start the 4wd issue...

So I posted yesterday about a 4wd Problem that popped up, I took my BS into another dealership this afternoon to see if I could get in any sooner, they pulled up my Vin and could see from my Vin the issues that were being reported by the BS in their computer system did I sign up somewhere for...

Yeah, I got a typo. Thanks for pointing that out, appreciate the help!

RSH. Thanks for the reply it's a 24 with just over 2k miles, so should be still on bumper to bumper warranty.

Started up after clocking out only to find a 4WD Fault Service Required Error, took it to the local Ford but couldn't get in for a week, they advised it wasn't a problem to keep driving. Hooked it up to my scanner at home and got the following DTCs. 4WD/AWD Power Transfer Unit Position Sensor...

LoL. Not offended, I see the confusion, but if you faced the led lights forwards towards the front of the car in the deep in cubby, i wouldn't have thought you would have got much benefit from it, d'no we'll see what he does with it. Edited to ease with confusion. LoL.

Hu? In the cubby, facing forwards towards the driver, which would be towards the back of the car, was that really that hard to understand? If you look at the piece he's made it looks to be maybe 1" by 1/5" placing that in the cubby facing downwards would take alot if room, facing it forwards...

Man that's a big project, kudos to you for taking that on.