Adding a circuit

[Mark S.]

If I need to connect anything in the future, it'll be ez-pz

We like ez-pz!

Sponsored

 

[LazyDirtFarmer]

Is it a 50 watt radio? thus 2 fuse taps needed?

No... It's a 20W radio. Rule of thumb: 1A for every 5W of TX power. So. I wired to #24 (always on) which is a 20A spare, but I fused down to 10A. The connections to Fuse #3 (ignition on) is for future use if I do a dashcam or something.

I think a 50W radio on Fuse #24 would be OK if I fuse back up to 20A. Note: Fuse #3 is a 10A circuit, so it's not for radios or subwoofers.

 

[PugDad]

you can use this: https://www.aliexpress.com/item/4000648828410.html?spm=a2g0o.order_list.0.0.171f1802zAhBvP

BS uses MICRO 2

in the fuse box under the dash, number 3 is available.

What fuses would you tap into for a dash cam, for the BS Badlands?

 

[Winds of Change]

Maybe this will help.
https://dongar.tech/products/ford5pin

 

[Rodrigo_V_U]

What fuses would you tap into for a dash cam, for the BS Badlands?

Hi, for a Dashcam? 5A is enough....

Sponsored