What did you do TO your Bronco Sport today?

[brianloch1974]

Proper Tires (posting them again because they’re so cool). Red line hood struts. Worth the money. 20 minute install…easy peasy.

 

[MJE]

The most minor of additions. Center console organizer. I chose the ROFITDS (I think that’s it?) one since they’re a forum sponsor. Not interested in a lot of non-facTory additions TBH, but this one was pretty sweet. Fits great, nice deep tray to divide the space up well. I just went out to try the USB cord & mine fits fine to be able to route through the hole. Quick easy amazon addition.

 

[Carolo]

The most minor of additions. Center console organizer. I chose the ROFITDS (I think that’s it?) one since they’re a forum sponsor. Not interested in a lot of non-facTory additions TBH, but this one was pretty sweet. Fits great, nice deep tray to divide the space up well. I just went out to try the USB cord & mine fits fine to be able to route through the hole. Quick easy amazon addition.

I like (have) that one also. Only problem is my fingers can't get enough grip to lift it for items under it. Solved with short chain and split rings both ends. Chain through usb cord hole and ring to grab to lift tray.

 

[MJE]

I like (have) that one also. Only problem is my fingers can't get enough grip to lift it for items under it. Solved with short chain and split rings both ends. Chain through usb cord hole and ring to grab to lift tray.

Great idea & solution! I can see it’d be tough to lift out if you cant grip the tray dividers enough (it does fit VERY well in the space!).

One thing I should mention too, the cable I had that fit fine was a USB-A. I just went to try a USB-C & that seemed to be a bit tight, it might depend on how hefty your connector is.

 

[jazzdab]

You can get them from any Ford accessories dealer. Levittown Ford has pretty good prices.

https://www.levittownfordparts.com/part-model/ford-bronco-sport-vehicle-safe.html

Current price ($296.53) is indeed good - especially for the 4 digit lock. The partner manufacturer (ConsoleVault) sells these on their site for $334. However they often have 20% off coupons if you sign up. You can also choose the less expensive 3 digit or key lock version.

ConsoleVault

 

[Glamdring70]

Didn't take a pic, but I hauled some 3/4" x 10' EMT conduit.
I managed to load it through the cabin and to the passenger footwell and the ends fit just inside the D pillar, angled, so that the glass closed and the conduit was not pointing at the glass. The middle fit into a "notch" on top of the rear seat between the headrest and buckle trim. I was willing make the short trip with the window raised if I had to but pleasantly surprised to find out it could load. Not sure if, oh, a half dozen lengths would all go in at once but that feels about the point where the glass has to pop open or maybe the seat fold.

 

[WLK]

PPF (Paint Protection Film) - full hood, fenders, headlights, and paint under the grill. Also tinting driver/passenger side windows. I should get it back later today.

 

[GulfCoastBronco]

Rough Country Nudge Bar w/Round lights. Rough Country roof light bar. Auxbeam 8 gang switch panel

 

[Escape2Bronco]

Didn't take a pic, but I hauled some 3/4" x 10' EMT conduit.
I managed to load it through the cabin and to the passenger footwell and the ends fit just inside the D pillar, angled, so that the glass closed and the conduit was not pointing at the glass. The middle fit into a "notch" on top of the rear seat between the headrest and buckle trim. I was willing make the short trip with the window raised if I had to but pleasantly surprised to find out it could load. Not sure if, oh, a half dozen lengths would all go in at once but that feels about the point where the glass has to pop open or maybe the seat fold.

I hauled a 24 x 24 x 66 cabinet in mine over the weekend. My wife wasn't very comfortable but we did it without the liftgate up or having to pull out the trailer. 10' copper would fit in the Escape, haven't had to try it yet in the Bronco.

 

[Major Kong]

Spark Plugs hitching post
prep work
circular saw & chisel

 

[Budstang2k5]

I ordered the Rear Bumper cover yesterday. Hopefully it arrives this week.

I had the rear bumper cover ordered and it got mauled in shipping. Local Ford dealer refunded me. I took a look at it while I was there and it is a heavy gauge decal. Not a rubber mat like I was expecting. Its also $94. I see one on Amazon for $36 and $39, they have a TPU and a rubber version. Still not very thick but certainly thicker than a decal. I did see a video of someone installing the Ford version, not sure it will offer all that much protection but looks nice.
https://www.amazon.com/YEE-PIN-Bronco-Sport-2021/dp/B09BFN21Y9/ref=sr_1_34_sspa?crid=68CJMTAT7D6L&keywords=bronco+sport+accessories+2022&qid=1658434967&sprefix=Bronco+Sport,aps,107&sr=8-34-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRjI0MkdSSVpSWDhGJmVuY3J5cHRlZElkPUEwNzA2NDk5RzFFSlU4UDNSOEdPJmVuY3J5cHRlZEFkSWQ9QTA4NjEyMjYzMEVSV0lNSjJaUEpCJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

https://www.amazon.com/Bumper-Protector-Bronco-Guards-Accessories/dp/B09BMYRQP2/ref=sr_1_5?crid=68CJMTAT7D6L&keywords=bronco+sport+accessories+2022&qid=1658434967&sprefix=Bronco+Sport,aps,107&sr=8-5

 

[Elegance]

I made an internal promise that if I got a build date for my Badlands before I came back to AZ, I'd order one dream accessory of my choice.

I ordered a full set of "Bronco" white LED illuminated letters for the front facade. Gonna try my hand at grille removal and wiring all six letters to my running lights once my Badlands arrives. They're going to be sitting in the garage for a few months, but I'm super excited. I haven't seen these white ones on a Sport yet and have only seen one person install the amber LED letters. Hoping to be very unique with mine. For those curious, the website photos only show them on the full-size Bronco, but our lettering is the exact same size.

https://www.oraclelights.com/products/oracle-lighting-universal-illuminated-led-letter-badges

 

[Glamdring70]

I hauled a 24 x 24 x 66 cabinet in mine over the weekend. My wife wasn't very comfortable but we did it without the liftgate up or having to pull out the trailer. 10' copper would fit in the Escape, haven't had to try it yet in the Bronco.

That's what the roof crossbars are for. And if you have a sunroof option, she can duck her head down out of the wind!

But seriously, I was pleasantly surprised to find out that it would haul a 10' item. I had doubts. I think I would need to use the crossbars for a 10' PT4x4 and get creative on the front.

 

[Carolo]

I made an internal promise that if I got a build date for my Badlands before I came back to AZ, I'd order one dream accessory of my choice.

I ordered a full set of "Bronco" white LED illuminated letters for the front facade. Gonna try my hand at grille removal and wiring all six letters to my running lights once my Badlands arrives. They're going to be sitting in the garage for a few months, but I'm super excited. I haven't seen these white ones on a Sport yet and have only seen one person install the amber LED letters. Hoping to be very unique with mine. For those curious, the website photos only show them on the full-size Bronco, but our lettering is the exact same size.

https://www.oraclelights.com/products/oracle-lighting-universal-illuminated-led-letter-badges

I think the lit-up letters are cool, but I'm way too poor to pay $40 a letter. Looking forward to seeing the finished product!

 

[mustangmech]

Hoping my BL is built and ships soon!

Sponsored