Search results

When I was starting to have issues I was preemptive, because I was dealing with a family illness and could not be stuck. Just bought an AGM battery, installed and did the BMS reset. Didn’t bother with dealer or warranty. Just shelled out the cash and one less thing to worry about.

A seal on my 23 BL with sunroof came loose ( about a foot length ) in the middle across the vehicle sealing sunroof with roof. It would flap in the wind, but it never caused a leak. Replaced under warranty, but the part is not just the seal, seal comes attached to the roofs leading panel...

Have the same noise. It’s the louvers on the rear vents. If you ever seen a vehicle with its rear sheet metal off you can see them. I discovered that the noise is present when the recirculate button is on. Air pressure while driving is lifting the louvers and settling back down making the...

Had that problem and fixed under that TSB last fall. Happening again and took to dealer and referenced that service bulletin. They told me it is no longer in the system. Actually, before I took it in and looked for it in the list of TSBs for my Bronco and it was no longer there. So what they...

How long did you wait on checking that led? Devices can hold power for a bit of time with the power led still lit even though power has been truly cut.

I installed mine a while ago and I have never got close to them to see how scratched they may be nor worry about that Just install and enjoy the additional side marker lighting.

SSM 51823 2019-2023 Edge/Nautilus, 2020-2023 Escape/Corsair, 2021-2023 Bronco Sport, 2022-2023 Maverick - AWD - Chatter/Shudder During Low Speed Turning Events Some 2019-2023 Edge/Nautilus, 2020-2023 Escape/Corsair, 2021-2023 Bronco Sport, 2022-2023 Maverick vehicles equipped with all...

True benefit of the fender insulators you have to ask Ford engineers. But like any insulation, noise and temperature would be my guess. These pads are not the same thickness as the dash panel insulator pad in the engine bay. The fender pads are about 1.5” thick. I was looking on the part...

So this is where I put them. They are different shape. The larger one is on the left (drivers) side. Right side is smaller and I put it where it is because of the space between the windshield fluid reservoir and the fender. Where are yours if you have them.

Sitting in vehicle. These look the same to me though

I put that insulator on but added the fender apron insulators too (M1PZ16E133A & M1PZ16E132A) that get wedged in the fender area above and forward of the wheels. While I was at it I installed the hood side weatherstripping which may help with hood shakes at higher speeds (M1PZ16A239A &...

This has been a great flashlight/ work light - Feit Electric WORK500BAT. Flashlight and flip up cob light. Magnetic mount, hook to hang, and usb rechargeable. Fairly compact and rectangular so it doesn’t roll around. Amazon website says it is 13.2” long. That is when the cob light bar is...

Here the items I purchased from Digikey.com and others. Much cheaper to buy and build yourself. But if not comfortable find another path. PART: WM17244-ND ($3.73 x 2) $7.46 MFG : Molex / 0334828601 PART: WM9433-ND ($4.26 x 2) $8.52 MFG : Molex / 0334721606 PART: WM3687CT-ND ($0.109 x 20)...

that is why I added a two-wire plug ?

First pic is of my headlight plug on the OEM harness. Second is the harness I made matching the OEM layout. What model do you have? I have Badlands and that has the Signature LED Lighting standard

Finally installed these on my Badlands. I got the two-wire version and decided to make my own harness that goes between the factory headlight plug and the headlight. On my harness I matched up the wire size to the factory harness and split off a two wire plug for the side marker. Making the...

Not Proclip, but this is what I installed from Course Motorsport and it made for the BS.

Brake dust cleaner for wheels and cargo area mat. Makes cleaning that area so much easier.

It is offset a little further than a vent clip and with the angle of the holder it is not a full block of the vent. Works for me, not for other maybe.

No major mechanical modifications, just connivence items. 1. Added an integrated pivot ball for a phone mount from Course Motorsport (install thread). 2. Fresh set of Drop Stop between two front seats. Used these for nearly 9 years on my Explorer and saved many of items going down between...