Recent content by Flatout Suspension

One other small engineering detail, the back side of the hub bracket is clearanced for the axle.

You'll see improvements everywhere... ride height, ride quality, etc.

Rear Shocks : Trail Runner vs OEM The first things you’ll notice is the shock rod. Our Trail Runner increases stroke to 10.50” and we added 4mm of thickness to the rod to increase lateral strength so you are less prone to bending the shock. Trail Runner on the right, OEM on the left.

Our friends at HRG Offroad have a leveling spacer. One thing I personally noticed about a level ride height in the BS, it feels weird. The front end feels higher than the back so parking feels...off. Like when I pull in to a parking spot, it seems like it's hard to judge if I'm in my spot...

If you have a Bad Lands, we have the Trail Runner Ultimate which includes strut spacers and new rear spring assemblies to get you about 2.5” of lift (maybe closer to 2.75”). This is a good setup as you can lift the front 2.5-2.75” and set the rear level or go to 3” to have 1/4” rake front to...

It’ll end up 1.0” over where you are now. You will go from 8.8” of ground clearance to 9.8”.

Bad Lands will see about 3/4”, but these are ideally for the standard trims. Most Bad Lands owners go for our full-blown GR40 suspension as It’s a little more hardcore to match those owner types.

For my visual learners, here's the OEM suspension next to the Trail Runner so you can see the length difference between the two...

After what feels like an endless number of requests, messages, emails, and “when are you finally making one for the Bronco Sport?” posts... https://flatoutsuspension.net/broncosport-tr/ We’re genuinely excited to finally say it: The Flatout Trail Runner is now available for the 2021+ Ford...

Our next batch of 10 arrived, 6 have gone out, 4 are in stock as of right now. These things go FAST, so don't dilly dally! We are currently running a sale too, so you will see the discount in your cart at checkout! See the 2" Level Lift Kit here Bronco Sport 2 Inch Level Lift: (Fits ALL Bronco...

Our next batch of 10 arrived, 6 have gone out, 4 are in stock as of right now. These things go FAST, so don't dilly dally! We are currently running a sale too, so you will see the discount in your cart at checkout! See the 2" Level Lift Kit here Bronco Sport 2 Inch Level Lift: (Fits ALL Bronco...

...well, in stock for now. We are doing our best to keep parts on a constant cycle. https://flatoutsuspension.net/products/bronco-2level As of writing, we have 4 ready to go in a box. Save 5% at checkout using the coupon code friendly5

Yep, tires and increasing rotational mass is what hits most.

We've had our own BS lifted 2 inches since May 22 with no issues. We have our GR Plus kit (still on the prototype we designed) paired with our 1.5" rear subframe drop and camber arms. It's aligned perfectly. Good quality and proper complimentary parts goes a long way in failure prevention.

25% off until Monday at Midnight (eastern)!! https://flatoutsuspension.net/search?q=Bronco+sport