Need Help, Looking for Ford Wiring Diagrams Please Please.

[Deleted member 6350]

Ok here goes, I have the cupholder from the 2021 Escape, there are 3 wires. Trying to find out what those 3 wires are ???
Ok now I need to know on the GoatMode Dial on a 2021 Bronco Sport there are 4 wires on that switch. I need to know what those 4 wires are ???

That way I can get my cupholder to light up in Blue if I tap into the GoatMode Dials wires.

Much Thanks. !!!

Sponsored

 

[Deleted member 6350]

Bump

 

[Deleted member 6350]

Bump

 

[CactusGreyBronco]

Not sure what they are. I wouldn’t mess with those wires. If I were you I’d run a tap on tot he fuse box There a lot more documentation on that.

 

[Moltenburn]

I agree with the above post I would run a fuse jumper to the cup holder would only be one wire and finding a ground by the armrest.

 

[Moltenburn]

Or break out a multimeter. Find which wire has the juice. But be aware by lowering the voltage to the goat mode dial, might cause issues

 

[Deleted member 6350]

Or break out a multimeter. Find which wire has the juice. But be aware by lowering the voltage to the goat mode dial, might cause issues

Yep Thanks, The cupholders blue lights are low voltage.

 

[MHUNTOON]

I'd love to find out that the wiring for a front camera (like on the Badlands) is already there and it just needs a camera installed. Doubt it, but that would be sweet.

 

[Steelbronco]

Ok here goes, I have the cupholder from the 2021 Escape, there are 3 wires. Trying to find out what those 3 wires are ???
Ok now I need to know on the GoatMode Dial on a 2021 Bronco Sport there are 4 wires on that switch. I need to know what those 4 wires are ???

That way I can get my cupholder to light up in Blue if I tap into the GoatMode Dials wires.

Much Thanks. !!!

Please tell me this is a joke???
Wire 1 : Don't
Wire 2 : touch
Wire 3 : these
Wire 4 : wires
Sheesh....c'mon on man use that thing between them ears!!! Find a better source for power than your apparently unimportant GoatMode Dial.

 

[Jcera304]

Yep Thanks, The cupholders blue lights are low voltage.

Were you ever able to get your cup holder working? I’ve got a BB too and I’d really like to get the ambient lighting working as well.

 

[Deleted member 6350]

Were you ever able to get your cup holder working? I’ve got a BB too and I’d really like to get the ambient lighting working as well.

Not yet, but it’s still a work in progress, I haven’t given up yet

 

[Jcera304]

If you ever need any help, let me know. I love tasks like this to keep me busy and let me work on my BS

 

[Deleted member 6350]

Hello,
here it is.
Please, don't touch these wires!

Ya I decided not to use the GoatMoad Dial, Thanks for the diagram anyway.

 

[Jcera304]

Hello,
here it is.
Please, don't touch these wires!

I’m gonna touch them so hard lol