Big Bend Build

[Hat3]

I got the old school badges on Amazon…no plans to move to Tennessee, the part of Pa I live in, within 3 hours you can be in NYC, Philadelphia, Baltimore, Washington DC, the beaches in NJ and Del, or hiking in the mountains of Western or NE PA.

Sponsored

 

[Ford Motor Company]

So far this is what I have done to my Bronco Sport

Exterior:
Aeroskin II
Weathertech Splash guards
Armstrong Tru Trac AT tires-stock size
Bronco logo door stricker covers
Full length rubber rear bumper cover
Rival engine skid plate
3” black and white stubby antenna
Remove Big Bend badge replaced with old school Bronco Sport badges
White overlay on rear hatch Ford Badge
Gloss black rear spoiler
Tectico fender lights
Bronco Trailer Hitch Cover

Engine compartment:

Added hood insulator
Added firewall insulator
Added Insulation to cavity driver’s side fender well
Added UPR oil separator
Steeda Strut Tower Brace

Interior:

Carbon Fiber colored interior trim for doors and center console
Ford Perimeter plus security system
Ford Bronco rubber mats
Envelope style cargo net
Aluminum Pedal Covers
Rear Defroster connector covers
Carskit Wireless Apple CarPlay

Planned upgrades:

Vivid Racing carbon fiber/leather steering wheel
Katskinz leather interior with heat and cooling
Steeda Rear Sway Bar
Additional skid plates

Beautiful photo of your Bronco Sport! Thanks for sharing your ride with everyone.

 

[Hat3]

Ford, thank you…enjoying the BS

 

[Hat3]

Added hitch shackle and lock

 

[Hat3]

Additions to build. Thinkware F200 Pro Dash Cam, Pedal Covers from Amazon, Vivid Racing steering wheel

 

[Colonel Angus]

Awesome build. I've only had my BB a little over a week and I want to change the steering wheel too. That one from Vivid Racing is beautiful. Ordering one seems like a real involved process. Something about a $500 deposit on your take off before they send the new wheel? how long did it take to get the wheel? where are the tabs located to release the air bag? Thanks.

 

[Hat3]

It took about 7 days to get the wheel, till they shipped it and it traveled from CA to PA. You need to turn the wheel so the steering wheel spokes are at the 12 and 6 position instead of 9 and 3, this will expose the holes on the back of the steering wheel. You will be able to insert a flat head screw driver in the hole, push the tab toward the wheel hub to release it.

 

[jarred Wilson]

Nice build buddy !

192.168.100.1 192.168.1.1​

 

[Hat3]

Thank Jarred!

 

[Hat3]

LED Lights

 

[Hat3]

 

[Hat3]

Engine bay

Sponsored