Recent content by MAD Industries

https://fifteen52.com/collections/off-road-truck-wheels/products/fifteen52-traverse-mx-frosted-graphite?variant=31599228551234 Call and talk with Joel

Figured as much just mentioned as we had friction at 1.25 on a Badlands set up that 4 wheel parts was not comfortable with during R&D. Look forward to seeing more picks of your finished Bronco Sport

Have you checked the CV angle at full droop, when we tested anything over 1.25" lift on front the CV joint has friction and binds

70 Series that is the reason they rubbed. :wink:

what size tire did you go with

245/65R17 will not rub on a leveled Bronco Sport with 17x8 plus 35 wheels period

Another note to consider that we drove this vehicle in some very rugged terrain with drops and big rocks my fitment never hit period for 1/4" or even a 1/2" taller tire it's not worth the aggravation.

Hello we have a much more aggressive wheel but nothing over a 30" OD would fit and clear at the critical turn radius areas where the shoulder of the tire passes the fender wheel edges at the bottom at the uni body junction locations front. We also were very close at the rear and had to remove...

Biggest advantage to the Leveling is increased tire clearance and the ability to install wheel and tire upgrade.

Looking Great

Sounds like a good price for the time it takes to pull the front Struts out and re-install, the rear is a bit quicker on the coils.

Give Joel a call at Fifteen52 he can help on the wheel info. https://fifteen52.com/

You will need to call your local 4WP for that dollar amount, I work with engineering and development team at 4WP not the retail side. Regards Chris

Hello all, As I promised this is detailed info direct from 4Wheel Parts one of our Project partners for those that would like order the Level / Lift we used on our MAD Bronco Sport Build. The Kits are not on the website yet and going quick, so you can call any 4WP and order direct 4wp store...

End of Jan or early Feb