Rear 110v plug in??

[Goinbroke2]

So the wife went to the drive in and tried to plug a radio in instead of leaving the BS radio on. Didn't work. So today, I'm home from racing and took a look and it has power as long as its running, but if I shut it off, hit the start button without touching the brake the "accessory mode" turns on. According to the manual, that is supposed to turn on the rear 110v outlet but it doesn't.
Am I missing something or should I start looking for a blown fuse, etc??

Yes I did a quick search and didn't find anything. (of course someone will show me 25 threads on the same question, LOL!!)

Thanks

Sponsored

 

[Glamdring70]

There are both power points and power outlets. I don't know what part you read in the manual. The 110v outlet in mine only comes on with full ignition. The 12v point comes on with accessory or ignition and goes off with delay when the car is off.

 

[Goinbroke2]

There are both power points and power outlets. I don't know what part you read in the manual. The 110v outlet in mine only comes on with full ignition. The 12v point comes on with accessory or ignition and goes off with delay when the car is off.

Thanks for the quick response!
well that sucks, I thought you could turn on accessories and run the 110 plug without the engine running…?

 

[Goinbroke2]

Wait a minute… full ignition.. as I’m running only, right?

 

[ScareCrow]

Wait a minute… full ignition.. as I’m running only, right?

The outlet provides power when the vehicle is on.

https://www.fordservicecontent.com/Ford_Content/vdirsnet/OwnerManual/Home/Content?variantid=7450&languageCode=en&countryCode=USA&Uid=G2255504&ProcUid=G2187767&userMarket=USA&div=f&vFilteringEnabled=False

 

[Goinbroke2]

Exactly! When the vehicle is on, as in not running. That’s what I thought too when I read it. It said something about 400w when the engine isn’t running and 300 when it is or something like that. That’s why I’m wondering why the outlet doesn’t work unless the veh is actually running.?

 

[Major Kong]

Exactly! When the vehicle is on, as in not running. That’s what I thought too when I read it. It said something about 400w when the engine isn’t running and 300 when it is or something like that. That’s why I’m wondering why the outlet doesn’t work unless the veh is actually running.?

Big Bronco forum has a few threads dedicated to inverter topics. You may find a post or two over there as well.

Sponsored