Adjustable sway links are not necessary. I just thought it made sense after I installed the lift. The stock sway links added quite a bit of downward pressure on the sway bar.@Nick246 was the adjustable sway links necessary for the lift in combination with the larger tires? I'm leaning towards the same leveling lift kit that you have, due to the fact that it appears to have better quality manufacturing than others. I was not planning to go with tires not bigger than 245/65/17
635 / 5000They rubbed on the felt liner but missed the pinch weld by a quarter inch. I took some pictures.
I trimmed the felt a little (about a 6-8inch oval. Then I thermoformed some Kydex sheets to the fender well behind the felt. I used a heat gun to soften the Kydex.
https://fordrangerlifts.com/shop/ols/products/nudge-bar-light-barWhat is this bumber model?
https://www.vividracing.com/-p-153557697.html?gclid=CjwKCAjwy7CKBhBMEiwA0Eb7ajT7t6Z7l3o46eB5nPPlPquZqhFonz8ykDtAbyIbRzvqaLnS0P7TRxoCWRwQAvD_BwENick246, your Bronco looks awesome. Question, where did you get your finder flares and are they clip on of double sided tape and 3M glue? If you don't mind could you give me the website and part number? Thank you Sir.
Thank you Sir. Wife and I are ordering a Badlands after Oct 1st and trying to get accessories lined up.https://www.vividracing.com/-p-153557697.html?gclid=CjwKCAjwy7CKBhBMEiwA0Eb7ajT7t6Z7l3o46eB5nPPlPquZqhFonz8ykDtAbyIbRzvqaLnS0P7TRxoCWRwQAvD_BwE
They are air design fender flares. Yes they Clio on and have double sides tape as well as some adhesive.
New flares mount over the stock flares.Nick246 Did you remove the stock plastic finder strips first or mount the new flares over the top of them?
Good question. I haven't used the scissor jack yet. I'll take a look when I get a chance and let you know.Another question, with the increased height are you able to use the stock scissor jack? I've read were people are buying a high lift jack but from what I remember as a kid those had to be placed under the front or rear bumper. Using it on the side would scratch the paint.