Bronco Base Build: 2" level kit, 30.5" BFG KM3 tires, light bar, 4" Rigid light pods

[FordBroncoLifts]

Do you know the largest tire that will fit on your Badlands lift? I know the website says 245/70/17 but do you think it would work with 255/75/17? Additionally, do you guys plan on developing further products such as wench mounting options?

It will fit 255/75 with some trimming. Firewall pinch weld and some carpet in the front. The rear is a little plastic in front of the rear tire and some carpet. I’m working on a low profile roof rack. I can see me designing a winch mount this summer.

Sponsored

 

[MatWithASingleT]

It will fit 255/75 with some trimming. Firewall pinch weld and some carpet in the front. The rear is a little plastic in front of the rear tire and some carpet. I’m working on a low profile roof rack. I can see me designing a winch mount this summer.

A low profile roof rack has been a dream of mine. I'll keep an eye in here and the facebook group. You're about to be getting a lot of my money

 

[FordBroncoLifts]

A low profile roof rack has been a dream of mine. I'll keep an eye in here and the facebook group. You're about to be getting a lot of my money

Ha ha I just love designing and fabrication.

 

[ths0002]

It’s my own brand. Available for pre order on my website www.Fordbroncolifts.com

Great website!

 

[Chaseliketheverb]

Just purchased my base model last Tuesday. I quickly designed and installed my own 2” level lift. I installed 245/70/17 bfgoodrich km3 tires. I will be installing some ALPHAequipt wheels this week. Just got the windows tinted yesterday.

March 1, 2021 Update

Added a front light bar and some 4” rigid lights.

What % did you get your windows tinted to?

 

[FordBroncoLifts]

What % did you get your windows tinted to?

12% all around.

 

[zackmd1]

Great build!

Since you seem to be the pathfinder on larger tires on the sport I hope you don't mind this question... What do you think the feasibility of wider then 245 tires are? Say 265/65R17 with a more aggressive offset than stock? That would be a 30.5" diameter and 10.5" inch wide tire. I would prefer a 265/60 but that is apparently non existent. I personally think a wider tire with flares to give the sport a slightly wider stance would look great but it seems very limited in what tires can actually fit.

 

[FordBroncoLifts]

Great build!

Since you seem to be the pathfinder on larger tires on the sport I hope you don't mind this question... What do you think the feasibility of wider then 245 tires are? Say 265/65R17 with a more aggressive offset than stock? That would be a 30.5" diameter and 10.5" inch wide tire. I would prefer a 265/60 but that is apparently non existent. I personally think a wider tire with flares to give the sport a slightly wider stance would look great but it seems very limited in what tires can actually fit.

Yeah it will fit. I think it would look good.

 

[FordBroncoLifts]

Current look of the bronco sport. 2” level lift. 17x7.5” Alpha foxtrot wheels with 255/75/17 bfgoodrich km2 minor trimming to fit this combo of size tire.

 

[Danible]

I want to see the 2 inch BS lift block. Wanting to see what is involved for $355

I make them. They are on my website. www.fordbroncolifts.com

 

[FordBroncoLifts]

I want to see the 2 inch BS lift block. Wanting to see what is involved for $355

I want steel prices to go down the 40% they just went up since last month.

 

[Powerz]

Current look of the bronco sport. 2” level lift. 17x7.5” Alpha foxtrot wheels with 255/75/17 bfgoodrich km2 minor trimming to fit this combo of size tire.

Looks so sharp with the lift and the tint. I just got the recovery hook assembly for my base ordered, does the nudge bar piggy back off that assembly point at all rendering them useless?

 

[FordBroncoLifts]

Looks so sharp with the lift and the tint. I just got the recovery hook assembly for my base ordered, does the nudge bar piggy back off that assembly point at all rendering them useless?

Yes the nudge bar utilizes the bolt points for the tow hooks. I could always add D-rings and or hooks to the bar itself.

 

[BamaBronco]

Looks so sharp with the lift and the tint. I just got the recovery hook assembly for my base ordered, does the nudge bar piggy back off that assembly point at all rendering them useless?

Do you know the part number for the tow hook assembly by chance? Also, let me know how the install goes if you do it yourself. I would imagine you have to cut out the plastic that covers where they will go on the front bumper.

 

[Powerz]

Do you know the part number for the tow hook assembly by chance? Also, let me know how the install goes if you do it yourself. I would imagine you have to cut out the plastic that covers where they will go on the front bumper.

Here you are! I had found it on another thread here. And yeah it's just popping it out/cutting it and then attaching the assembly.

https://parts.ford.com/shop/en/us/body/bumpers/bracket-assy-towing-hook-supp-12018101-1

Sponsored