Search results

  1. MRanderson

    New Custom Overland Roof Rack for the BS

    The rack is completely flat on top so you should be able to mount your RTT to it. The cross bars are 30mm x 30mm so as long as your bracket fits those dimensions it should fit. As far as weight goes, we recommend just staying withing Ford's guidelines for their vehicles. 150lbs dynamic without...
  2. MRanderson

    Rough country lift kit: Snapped/bent sway bar drop bracket

    I’ve been running my shortened OEM links for a bit now. No issues at all. I’m going to make my own lift spacers to offset the geometry changes to the knuckle/arm to make the ride quality better. I basically bought the RC lift, and made my own instead because of how crappy the RC Stuff is. Don’t...
  3. MRanderson

    New Custom Overland Roof Rack for the BS

    We bought crossbars right after getting our bronco sport and I agree with you, they are NOISY! I expected this rack to be noisy as well considering it's on the roof of a car going 70+ on the freeway. My wife and I were pleasantly surprised, this rack is much quieter than the crossbars. I think...
  4. MRanderson

    New Custom Overland Roof Rack for the BS

    Yes, I’m making brackets to put a straight light bar under the front fairing and a curved one above it - can’t run the lower one with the sun roof. The side brackets have holes laser cut in them to be compatible with Rotopax mounts, XBull traction boards, and hi lift trail Jack mounts! We just...
  5. MRanderson

    New Custom Overland Roof Rack for the BS

    Super easy!The production rack weighs under 50lbs, requires an Allen wrench and a couple sockets to install. No cutting or drilling at all, simple Bolt On construction
  6. MRanderson

    New Custom Overland Roof Rack for the BS

    Howdy! We’ve been selling them actually and doing pretty well. Check us out @yuccamnfg (Instagram) and www.yuccamanufacturing.com . I have another production order going through tomorrow - message me if interested! Thank you, Jared
  7. MRanderson

    245/60R18 tires fit no rub on Bronco Sport!

    I know some people have done spacers I held off because I have broken hub bearings running spacers off-road and who knows when spare parts with be easy to get for these cars. With the 1.5” lift I know a lot of people are going to 265s.
  8. MRanderson

    Rightline SUV tent and YuccaMnfg Rack

    Thought I’d pop this up here for the overland era. We grabbed a Rightline SUV tent from REI and put it to use over the weekend. It fit our BS nicely and secured very well. We launched our Bronco Sport roof rack and company called Yucca Manufacturing last week and people are loving it! If your...
  9. MRanderson

    Best tire size for running with Rough Country Lift and rubbing or cutting?

    Sweet BB looks a lot like ours with the wheels and everything! :D I have the RC lift on it, running 245/60r18 Falken Wildpeak Trails (not the 3s). They fit great and won’t rub even under articulation. You don’t need the kit with them either. A note if your doing the RC kit, there have been a...
  10. MRanderson

    Rough County Lift Fix

    Today was our first day driving with our correctly cut to length sway bar links. They feel great and have been working well both on and off road. 100% the Rough Country Drop Brackets will break from off roading. Oddly enough mine broke last week. The OEM links are much better built and include...
  11. MRanderson

    What did you do TO your Bronco Sport today?

    Today we installed and tested our shortened OEM sway bar links to replace the RC ones that broke with the 1.5” lift kit. The ride is so much better and no knocking or buckling
  12. MRanderson

    New Custom Overland Roof Rack for the BS

    dynamic load of 150lbs, minus the rack that’s 80-90lbs of weight you can store while driving. 520-530lbs static load after the rack install, Seemed worth it to me
  13. MRanderson

    New Custom Overland Roof Rack for the BS

    I’m sure there is, but we did this recently on a buddy’s Escape only to find the oem rails were held on by 3 very small screws. The oem rails are going to fit best to the car and won’t scratch it and be rain proof, displace load well, and help raise the rack to clear the sun roof - which the BS...
  14. MRanderson

    New Custom Overland Roof Rack for the BS

    I designed and made steel brackets. The pic is during prototype, after Powdercoat I use rubber tape for the contact points to the roof rails so they don’t scratch. the brackets have an angle piece so they are touching the roof rails on 3 sides and are very strong
  15. MRanderson

    Dealer mark up price

    I live in SoCal there’s pry 10 Ford dealers in the he Inland Empire alone out here. Some have discounted advertised prices and some had markups as high as $8k. Chino Hills Ford had a base model with no add ons for $34k...my jaw dropped
  16. MRanderson

    New Custom Overland Roof Rack for the BS

    Thank you! The main rack/ basket is steel and the outer finish pieces are aluminum. The whole system is about 70lbs with hardware.
  17. MRanderson

    New Custom Overland Roof Rack for the BS

    It’s actually my own design. I’m an engineer in manufacturing and decided to make it. You can use it with or without the accessory brackets shown Everything is able to be reproduced if anyone is interested.
  18. MRanderson

    New Custom Overland Roof Rack for the BS

    Anyone else looking to do something like this to their Bronco Sport?
  19. MRanderson

    Rough County Lift Fix

    Over the last couple weeks I’ve seen thread after thread about issues with the Rough Country kit. My issue was the clunking in the front end, which was due to the horrible sway bar link contraption included with the kit. The drop down bracket adds another bolt. The links have bolts that...
Top