Search results

Hi, I’m looking to change out my oil pressure sensor, as I believe it to be part of an issue I’m having. On the ford parts website there are 2 different oil pressure sensors that come up as compatible for the 22 Bronco sport Big bend 1.5 should I go by the color of the oil sensor or are they...

I’m pretty sure my 22 big bend is marked as SW on the title, and I have a passenger car plate in PA

How many miles did you have with the turbo failure? And the purge valve.

I haven’t had an issue yet in the Bronco, in my cobalt I constantly had the issue though. Which was odd because they were adjusted to factory height. In fact the low beams I usually got flashed and the highs didn’t seem to bother people

I’m going to hope for the best and go as far as I can. I have a 22 with the 1.5L. No warranty’s as they are all voided except maybe the emission one. but still under 15k miles. Planning on doing the rear diff fluid and trans fluid every 30k. Engine oil every 5 / 6 k. Still deciding when to do...

That’s the picture that I seen. Just tring to judge the left arm that goes from the bottom to the grid, how wide and what thickness and how far it sits back from the front of the screen. I’m making a custom mount to attach to the Rubigrid and might incorporate that into my design

Hi, I have a 22’ big bend and ordered the Rubigrid for mounting a few particular things. As I’m waiting to get it, I was wondering if anyone has a picture of it from both the left and right side and also a picture of the back as if your looking at it threw the windshield. Mostly all pictures I...

I installed powerstop front and rear rotors and pads on my ‘22 big bend. Work great and no backup squeaks so far. I got mine threw AutoZone, the cost was more but the total ended up being cheaper than if I got them threw rock auto due to the shipping cost.

Hi! I have a 2022 Bronco sport that was in a collision. I have to replace the subframe due to damage. I was wondering if anyone had access to the tram or measurements of the body. Looking for any for the rad support, the strut towers, the subframe mounting points etc. just want to make any...

Just came across this while looking up torque specs for a focus that I’m working on. Pretty neat and has a lot of information. https://lemon-manuals.org.ua/Ford/ looks like they have manuals for other makes and for ford its 1960-2025 hope this is allowed! And hopefully the site stays up!

Looking for a single Y spoke wheel 18x7 , or a complete set of the aluminum steelie wheels. I’m located in the Scranton PA area. Thanks!

Do you still have these? Do you ever travel to the northeast section of the state?

That’s what I see for the owners manual, the updated and one that came with car. In the printed ford wiring manual the numbering is different. Fuse 7 would correspond to fuse 12 in the diagram above.

Just a little confusion on a fuse! I have a blown fuse number 7 in the engine bay. Looked at the diagram in the 2022 Bronco sport wiring diagram book, makes sense because some of the items on that circuit aren’t working. When I look at the battery junction box section in the book it says FUSE...

Exactly. I took the car for a drive after replacing the endlinks, steering column, tierod ends and inner tie rods. Replaced passenger wheel and liner. Drives nice overall and everything seems to function. Seen that a few codes were for the evap. Removed the undercover driverside and the canister...

I have 4 cats at well, 2 orange, a tortoise shell and a big fat gray kitty lol

Unfortunately that’s probably the case. It’s a salvage car, and just tring to keep the cost low and the downtime to the minimum. I just don’t feel like going through the harness and finding out it was a short in one of the sensors or connectors haha. Plus it’s easier to sort through the harness...

Yeah I seen that in the owners manual, I currently have a few codes related to mostly evap and was thinking it’s partly something to do with the that system.

Hi, im new here and purchased a 22 bronco sport big bend 1.5 to fix up! I was wondering if someone had a diagram on everything that’s powered by Fuse 12 in the engine bay fuse box. Looks like there is a dead short either by a sheared wire or a bad component. Before I start going thru the...