Search results

  1. Switch controller install

    I got a cheaper price from auxbeams website with a coupon code
  2. Switch controller install

    Yeah, used a 1" wire conduit to give room for the switch and acc wire then sealed with black silicone
  3. Switch controller install

    It's pretty easy. I was able to attach to original bolts for the mount and just used L brackets painted black to mount. The hardest part is routing the wire into the interior because of the thickness
  4. Switch controller install

    Just installed a 6 gang auxbeam switch controller. Works great, cleans up the engine bay of relays/wires and stops any unnecessary battery drain.
  5. New ditch lights

    Just attached a license plate cover to this, worked great https://www.amazon.com/dp/B08XM6BTTD/ref=cm_sw_r_apan_glt_fabc_VK9EXV7HKASCG2CTKB9B?_encoding=UTF8&psc=1
  6. New ditch lights

    New auxbeam ditch lights They are super bright
  7. Disabled auto start/stop with Forscan

    I've seen that but this option is much cheaper💵
  8. Disabled auto start/stop with Forscan

    No issues yet only a message in the autoss screen on the dash which I never look at. The button works but is pointless due to autoss being disabled. Still playing around to see if the button can reactivate autoss without a computer
  9. Disabled auto start/stop with Forscan

    Just removed auto start/stop with forscan doing the pscm method and it works great, no warnings or bcm turned off PSCM 730-03-01 xxxx xxxx 00-
  10. Rough Country nudge bar installed

    I use the camera as a trail camera. The angle is perfect to see obstacles on trails in front of the car since the hood is so large
  11. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    I added a wire conduit through the wire access behind the battery it also allows for future routing
  12. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    1.4" Short Carbon Fiber AM/FM Radio Antenna Aluminum Black Vehicle Car Aerial Universal Replacement by GTP https://www.amazon.com/dp/B01LZK5IRN/ref=cm_sw_r_sm_apa_glt_fabc_4450C6K76YA6SRQNPQWK?_encoding=UTF8&psc=1
  13. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    It's attached to the bumper skin only. There are access holes to get to the bolts for the engine cover if it needed to be removed but not attached to it. Didn't think it was necessary to attach to the bumper front bar
  14. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    It's a wireless camera setup with screen from Amazon. It supports multiple cameras so you could have one in the front as a trail camera and one on your dash as a dash cam .
  15. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    The bumper has to be removed and lighting is routed before you put the bumper back on. The switch gets routed through the firewall access point behind the battery to inside
  16. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    I added threded inserts to the bottom of the bumper and used bolts to attach it. It also has holes allowing access to the original bolts under attaching the bumper to the car. So the the bumper can be removed without removing the skid plate
  17. Some exterior mods: bull bar with lights, skid plate, blacked out Ford emblem, smaller antenna

    The switch is under under the other light switches on the left driver side. I went through the wire access grommet behind the battery to get the wires inside the cabin
Advertisement
Top