- First Name
- Jamie
- Joined
- Nov 15, 2021
- Threads
- 1
- Messages
- 8
- Reaction score
- 12
- Location
- Pike Road AL
- Vehicle(s)
- '21 Bronco Sport
- Thread starter
- #1
Heya.
I *was* using a Belkin brand phone mount that uses the air vents, and got frustrated with it flopping about since the BS vents are vertically mounted, and thus any weight (like a phone mounted on them) will cause them to rotate with the slightest left/right turn of the vehicle.
So , I went about designing a clip that would kinda clip over parts of the console facia. This is what I came up with:
I chose to have a simple 17mm ball mount on it , but I also made a blank if you wanted to go with some other interface.
I *was* using a Belkin brand phone mount that uses the air vents, and got frustrated with it flopping about since the BS vents are vertically mounted, and thus any weight (like a phone mounted on them) will cause them to rotate with the slightest left/right turn of the vehicle.
So , I went about designing a clip that would kinda clip over parts of the console facia. This is what I came up with:
I chose to have a simple 17mm ball mount on it , but I also made a blank if you wanted to go with some other interface.
Sponsored